Installation instructions, 19-5/16, 16’

Installation instructions

This appliance is classified as ”Y“ class for heat protection. There may be a wall at the rear and a wall or tall cabinet at one side. On the other side, however, no cabinet or wall must stand higher than the grill.

There must be a minimum distance of 9-7/8" (250 mm) between the ap- pliance and adjacent cabinetry, be- cause of the heat radiated from the elements.

2-3/16"

19-5/16"

2-3/16"’

Prepare the countertop cut-out as il- lustrated.

Dimension ”B“ will vary depending on how many combisets are installed. The following chart gives dimension ”B“ for a variety of 2 zone (ie KM 88-2) and 4 zone (ie KM 93-2) combinations.

			Width *
		Depth	(= Dimen-
		in	sion B)
		mm	in mm

2 zone Combiset
1	Combiset	490	265
2	Combisets	490	558
3	Combisets	490	851
4	Combisets	490	1144
5	Combisets	490	1437

4 zone Combiset
1	Combiset	490	560
2	Combisets	490	1143
3	Combisets	490	1728

Combination
One 2 zone
+ one 4 zone		490	851
Two 2 zone
+ one 4 zone		490	1143
Three 2 zone
+ one 4 zone		490	1437
One 2 zone
+ two 4 zone		490	1436
Two 2 zone
+ two 4 zone		490	1729

Extractor (e.g. DA 8-2)

For building in between two appliances:

- Dimension B increases by 90 mm.

For building in at the end of a combination:

-Dimension B increases by 98 mm.

*Width includes provision for V 98 spacer bar.