Miele KM88-2 operating instructions Combiset 19-5/16 10-7/16 Combisets 33-1/2 45-1/32 56-9/16

Installation instructions

		Depth	Width *
		in	(= Dimen-
		inch	sion B)
			in inch
2 zone Combiset
1	Combiset	19-5/16"	10-7/16"
2	Combisets	19-5/16"	22"
3	Combisets	19-5/16"	33-1/2"
4	Combisets	19-5/16"	45-1/32"
5	Combisets	19-5/16"	56-9/16"
4 zone Combiset
1	Combiset	19-5/16"	22"
2	Combisets	19-5/16"	45"
3	Combisets	19-5/16"	68"
Combination
One 2 zone
+ one 4 zone		19-5/16"	33-1/2"
Two 2 zone
+ one 4 zone		19-5/16"	45"
Three 2 zone
+ one 4 zone		19-5/16"	56-9/16"
One 2 zone
+ two 4 zone		19-5/16"	56-1/2"
Two 2 zone
+ two 4 zone		19-5/16"	68-1/16"

Extractor (e.g. DA 8-2)

Place the provided seal f under the edge of the grill.

loosen tighten

bAppliance

cTensioning screw d Clamp

e Countertop f Seal

Turn the tensioning screws c counter clockwise until a resistance is felt, then turn the clamps d to the left.

Place the appliance in position, turn the clamps and tighten the tension- ing screws until the clamps press into the countertop e, as shown.

Install the stainless steel lid, EA 80 (if applicable). It is supplied with its own installation instructions.

Connect the appliance to the electri- cal supply.

When installing several Combiset units, a stainless steel spacer bar must be placed between the units. It is supplied with its own installation instructions.

17