The Dock I can accommodate one, under-1-inch-high internal SCSI
hard disk.
This section describes the procedures for installing and removing
the internal SCSI hard disk for the Dock I.
Installing the Internal SCSI Hard Disk
To install the internal SCSI hard disk in the Dock I, do the
following:
1.
Remove the bottom cover.
See “Removing the Bottom Cover” on page 4-3.
2.
If you have installed an adapter
card, remove it.
See “Removing the Adapter Card” on page 4-23.
3.
If the blank bezel is installed,
remove it.
See “Removing the Blank Bezel” on page 4-8.
4.
Attach the internal SCSI hard
disk to the optional Internal
SCSI Device Installation Kit.
Refer to the manual that came with the option.
4-14 IBM ThinkPad Dock I User’s Guide
Title: C74AMST CreationDate: 06/23/93 17:09:07