IBM Dock I manual Using the Scsi Diagnostics Utility, Playcd Utility

Title: C74AMST CreationDate: 06/23/93 17:09:07

6.

Follow instructions on the screen to install the CD-ROM device driver.

PLAYCD Utility

The PLAYCD utility program is not installed during this installation procedure. The PLAYCD.EXE and CDPLAY.HLP files are available on the CD-ROM Option/Device Driver Diskette. If these files are needed, use the OS/2 COPY command to copy the individual files from the option diskette.

Now installation is complete.

Using the SCSI Diagnostics Utility

This section explains how to prepare your hard disk drives for use with your computer system and how to identify the problems with the SCSI diagnostics utility (FDSDA.EXE).

Preparing SCSI Drives

If your SCSI drive has been used previously in another system configuration, it is advisable to run a low-level format first with the SCSI diagnostics utility.

Then run your IBM DOS or OS/2 FDISK and FORMAT utilities to partition and format the drives in accordance with your IBM DOS or OS/2 documentation.

The low-level format prepares a drive to work with an operating system. It also scans the disk surface and builds a defect list to relocate any defective sectors to a known good area of the disk.

5-20IBM ThinkPad Dock I User’s Guide