IBM Dock I Name of Feature Description, Drive, Headphone or Speakers, Lever, Slide-Knob, Hooks

Title: C74AMST CreationDate: 06/23/93 17:09:07

Name of Feature Description

6Location for less The Dock I can accommodate one storage device here. The blank than 1-inch-Highbezel is removed when installing an internal option.

Drive

7Status Indicators The status indicators are LEDs (light-emitting diode) that indicate the current status of the Dock I by their On/Off states. Each status indicator has a matching special symbol below it.

For more information about the status indicators, see “Dock I Status

Indicators” on page 1-9.

8Headphone Jack The headphone jack is where the plug of the stereo headphone is connected.

Headphone or Speakers

When the stereo headphone plug is connected to this jack, the speakers do not operate.

9Release/Lock When the release/lock lever protrudes from the Dock I, snapping it

Lever	closed secures the computer by engaging the computer with the
	hooks 14 . Sliding the slide-knob 11 to the left snaps the
	release/lock lever open.

1Security Lock The security lock is used to secure different features on the Dock I, depending on the position of the key. This prevents the bottom cover of the Dock I from being removed, prevents unauthorized persons from using the Dock I by securing the power, and prevents the computer from being removed from the Dock I. (For more information, see “Using the Security Lock” on page 3-2.)

11 Slide-Knob Sliding this knob to the left snaps the release/lock lever open.

12Left Speaker

13	Docking-Knob	This knob is as a finger-hold with the lever cover 3 when attaching
		the computer to the Dock I.
14	Hooks	Snapping the release/lock lever 9 closed engages the computer
		with the hooks.

Chapter 1. Introduction 1-5