Title: C74AMST CreationDate: 06/23/93 17:09:07
If your SCSI drives are new, using the appropriate IBM DOS or
OS/2 utility programs is the only step you need.
The SCSI diagnostics utility helps you troubleshoot SCSI controller and device problems through a series of menus.
Starting the SCSI Diagnostics Utility
This section explains how to run the SCSI diagnostics utility from the Dock I Option Diskette to verify the configuration you just installed.
To start the SCSI diagnostics utility, do the following.
1.
Insert the Dock I Option
Diskette into drive A.
2.
Turn on all attached devices, then turn on the computer.
3.
In the main menu, select “Diagnostics”. Then select “Test SCSI Subsystems”. This screen appears. Note that in this screen the Dock I SCSI controller is referred to as adapter. Press Enter.
Note
If you have not attached a SCSI device to the Dock I SCSI controller, the diagnostics utility reports an error that no SCSI host adapters were not found.
