Miele G 5285, G 5280 manual Frequently Asked Questions, Technical faults

Frequently Asked Questions

￿Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.

Technical faults

Problem	Possible fault	Solution
The dishwasher will	The door is not properly	Push the door firmly closed.
not start.	closed.
	The dishwasher is not	Insert the plug.
	plugged in.
	The circuit breaker has	– Reset the circuit breaker
	tripped.		(see data plate for the
			correct fuse rating).
		– If the circuit breaker trips
			again, contact Miele.
	The dishwasher is not	Press the ￿ button and select
	turned on.	a program.
The dishwasher	The circuit breaker has	– Reset the circuit breaker
stops during a	tripped.		(see data plate for the
program.			correct fuse rating).
		– If the circuit breaker trips
			again, contact Miele.
The buzzer sounds.	There may be a	Press the ￿ button to turn the
All the indicator	technical fault.	dishwasher off.
lights of the		After a few seconds:
program selection		–	Turn the dishwasher on.
flash when the door
		–	Use the Program button to
is open.
			select the desired program.
The time display
		–	Close the door.
shows fault FXX.
		If the indicator lights flash
		again, there is a technical fault.
		–	Contact Miele,
In addition, the drain	Fault F70:	– Close the water supply.
pump may run even	The waterproof system	–	Contact Miele.
when the door is	reports a fault.
open.

42