Additional options
Factory defaults
If you have changed any settings, you can reset them to the factory defaults.
Open the door.
Press the button to turn the dishwasher off.
Press and hold the Program button and simultaneously turn the dishwasher on using the button. Keep the Program button pressed for at least four seconds until the lower right program indicator lights up.
If it does not come on, start over.
Press the Turbo button 12 times.
The Turbo indicator shows 1 long flash and 2 short flashes in intervals.
The flashing in the time display shows whether a setting is different from the default setting.
–"p 1": all values are set to the default settings.
–"p 0": at least one setting has been changed.
Press the Program button to reset the dishwasher to the factory defaults.
The setting is immediately saved.
Press the button to turn the dishwasher off.
41