Kompernass KH 6510, KH 6511 manual Rating settings, Use Default

KH6510_11_A4_V3_EN.qxd 24.08.2006 12:25 Uhr Seite 12

KH 6510/6511

-Digital Output: Here you set the digital output signal of the DVD player.

OFF: No digital audio component is connected

PCM: a two channel digital audio com- ponent is connected via coaxial cable or optical cable.

RAW: a multi channel digital audio com- ponent i.e. DTS receiver is connec- ted via coaxial cable or optical cable.

-Night mode: Here you activate/deactivate the night mode. This setting allows for optimal sound playback with reduced volume. The louder transmissions are suppressed and the quieter transmissions are played back a little louder. This function is only possible when using a digital audio com- ponent.

-ProLogic: Here you set the Dolby ProLogic compati- bility.

OFF: No Dolby Prologic compatible audio component is connected to the ana- logue stereo output (L/R).

ON: A Dolby Prologic compatible audio component is connected to the ana- logue stereo output (L/R) of the DVD player.

8.5. Rating settings

In this Menu you can administer the settings for the child lock and change the password.

-Parental control: Here you set the child lock in three levels.

G:Only unrestricted DVDs can be played.

PG-13: No DVD with an age restriction over 13 can be played.

Adult: All DVDs, including those with age restrictions over 18 can be played.

To activate the age release you must select the option "Parental control" in the OSD Menu under "Rating" and enter the pass- word (8888). You confirm your entry by pressing the button "OK".

Again select the option "Parental control" and now set the desired child lock level. You confirm your entry by pressing the button "OK".

-Change password: Here you can change the preset password (8888) and submit your own password. Only the numbers 0-9 can be used.

To change the password select the option "Change password" in the OSD Menu. Enter the valid password. You confirm your entry by pressing the button "OK". Again select the option "set password" and enter the new password. You confirm your entry by pressing the button "OK".

NOTE:

In case you should forget your new password you can use the factory default password (8888).

8.6. Misc settings

In this Menu you can return the DVD player to its factory de- faults and set the DVD playback priority.

-Use Default

Settings: Here you reset the DVD player's factory

default settings.

-DVD-Priority:Here you make the setting to decide whether in audio DVDs with additional film material priority for display is given to the music or the film material.

DVD-AUDIO: The music has display priority.

DVD-VIDEO: Film material in Dolby 5.1 has display priority.

- 12 -