Kompernass KH 6510, KH 6511 manual Using the OSD Menu, Language Settings

KH6510_11_A4_V3_EN.qxd 24.08.2006 12:25 Uhr Seite 10

KH 6510/6511

8.Necessary settings to the DVD player before operation

All possible settings on the DVD player can be administered with the remote control via the so called "OnScreen display" menu (in short "OSD Menu"). The OSD Menu will be super- imposed on the television screen.

Before you use the DVD player for the first time for playback of DVDs, VCDs/S-VCDs or Audio-/MP3-CDs you must imple- ment a few settings via the OSD Menu. These settings are dependent amongst others on...

•the language, in which you want the OSD Menu to be displayed

•which TV standard corresponds to the television, to which you want to connect the DVD player

•Which image format your television can display

In order to implement the necessary settings via the OSD

Menu...

•First insert the connecter plug of the DVD player's power cord into a power socket.

•To turn the DVD player on press the "ON/OFF" button on the front panel of the DVD player. If the DVD player is already switched on but is in Standby Mode press the button "Standby" on the remote control to switch the DVD player on. Standby Mode is indicated by the red LED on the front panel of the device.

The device will check to see if a disc is inserted.

The SilverCrest-Logo appears on the television screen:

•Firstly please familiarize yourself with the OSD Menu's operation by means of the following brief introduction.

8.1. Using the OSD Menu

To summon the DVD player's OSD Menu...

•Press the "Setup" button on the remote control.

The OSD Menu with its menu options will appear on the television screen:

The following menu options can be set:

Language, Video, Audio, Rating, and Misc.

•The control buttons will move you through the OSD Menu. To confirm a selection or input press the "OK" button.

•To exit the selected OSD Menu option press the control button , until the left Menu tab (Language, Video etc.) is active. Select another Menu tab with the control buttons and activate the OSD Menu option with the control button .

•To exit the OSD Menu press the button "Setup" again.

8.2. Language Settings

You can preset the languages for the Menu-language, DVD- Menu, Subtitles, Audio and DivX Subtitles functions. These settings are valid for every DVD if the selected language is present on the DVD.

-OSD Language: Here you set the language, in which the OSD Menu will be displayed on the tele- vision screen.

-DVD Menu: Here you set the language, in which the DVD Menu will be displayed on the tele- vision screen. Not all films contain a menu on the DVD. If a menu is available then it can only be shown in the language that you set if this language is available on the DVD. If the selected language is not available then the DVD Menu will be displayed in another language.

- 10 -