Kompernass KH 6510, KH 6511 manual Connecting to a television via Scart Cable/RGB Note

KH6510_11_A4_V3_EN.qxd 24.08.2006 12:25 Uhr Seite 6

KH 6510/6511

6. Connecting the DVD player to a Television

After setting up the DVD player, you can now connect it to a television. The DVD player can be connected to a television that operates with the PAL, NTSC and SECAM standards.

If you want to use the DVD player on a television with...

•... NTSC standard you will have to change the video setting in the DVD's so called "OSD menu". There PAL is set as the television standard at the factory.

•SECAM standard you do not need to change any settings. The factory setting for the PAL standard also allows the DVD player to operate with SECAM televisions in so far as these can process the signals.

ÔOn this topic see also capital 8.3 "Video settings: TV standard".

Depending on the features of the television, there are various options for connecting the DVD player to it:

6.1.Connecting to a television via Scart Cable/RGB Note:

Connecting the DVD player to a television with a Scart cable via the RGB input offers a high quality connection. Select this connection variation in the case of televisions equiped with an RGB input. If you are not sure if the television is equiped with an RGB input then you can check this by consulting the television's instruction manual.

•Connect the jack inscribed with Euro Scart to a television Scart socket by using the supplied Scart cable.

•For playback select the matching chanel on your television Check with the television's instruction manual on how you can set the AV chanel.

•In the OSD menu select the menu Video/Video output/RGB.

ÔOn this topic see also capital 8.3 "Video settings: Video output.

6.2.Connecting to a television via S-Video NOTE:

For this connections variant the television must be equiped with an S-Video input and two unoccupied audio cinch sockets.

If you are not sure if the television is capable of handling S-Video, for example via cinch sockets, then you can check this by consulting the television's instruction manual.

For this connection variant you will need:

•an audio cinch cable (not supplied)

•an S-video cable (not supplied) These can be obtained from your dealer.

In order to connect the DVD player to a television via S-video

•Connect the jack inscribed with S-Video to a television S-Video socket using an S-video cable.

•Insert the white audio cinch cable plug into the cinch socket inscribed "L" on the rear panel of the DVD player.

•Then insert the white plug at the other end of the audio cinch cable into the left channel audio socket on the tele- vision.

•Insert the red audio cinch cable plug into the cinch socket inscribed "R" on the rear panel of the DVD player.

•Then insert the red plug at the other end of the audio cinch cable into the right channel audio socket on the television.

•For playback select the matching channel on your tele- vision Check with the television's instruction manual on how you can set the AV channel.

•In the OSD menu select the menu Video/Video output/RGB.

ÔOn this topic see also capital 8.3 "Video settings: Video output.

- 6 -