Kompernass KH 6511, KH 6510 manual Playing back DVDs, VCDs or S-VCDs

KH6510_11_A4_V3_EN.qxd 24.08.2006 12:25 Uhr Seite 15

10. Playing back DVDs, VCDs or S-VCDs

To play back a DVD/VCD/S-VCD with the DVD player...

•Switch on your television.

•Make sure that the DVD player is ready for operation.

If the television, the DVD player and possibly other connected devices (i.e. an audio component) are ready for operation and are switched on and the DVD player is connected correctly to the television you will now see the "Silvercrest" logo on the TV screen

• Open the disc tray on the front panel of the DVD player by pressing the button "Open/Close" on the front panel of the DVD player or on the remote control.

"Open" will now appear In the display on the front panel of the DVD player and on the television screen.

•Insert a DVD/VCD/S-VCD disc in the disc tray with the inscri- bed/labled side up.

•Press the button "Open/Close" on the front panel of the DVD player or on the remote control again to close the disc tray.

"Close" will appear in the display on the front panel of the DVD player and on the television screen while the disc tray is closing.

•The contents of the inserted DVD/VCD/S-VCD will now be loaded; this may take a few seconds. Meanwhile "Load" will flash in the display on the front panel of the DVD player and "Read" will appear on the television screen.

•Playback of the inserted DVD/VCD/S-VCD starts automatically.

NOTE:

DVDs, VCDs and S-VCDs, that you want to playback with the DVD player possibly have a country code, which is printed on the DVD cover.

The DVD player can only playback DVDs/VCDs/S-VCDs with the country code 2.

If no country code is printed on the cover of a DVD/VCD/ S-VCD...

• but instead the symbol , then the DVD/VCD/S-VCD can be played back with the DVD player

•Then the DVD/VCD/S-VCD can possibly not be played back with the DVD player. You can check this by attempting to play back the DVD.

KH 6510/6511

Depending on the inserted DVD/VCD/S-VCD it is possible that the contents of the DVD/VCD/s-VCD will not playback imme- diately, rather first a selection menu appears on the television screen.

In this event select the menu option which will start the play-

back of the film with the control button on the remote control.

•To start the playback of the film...

•Press the "OK" button on the remote control.

or

• Press the "Play" button on the front panel of the DVD player or on the remote control.

"Play" will briefly be superimposed on the television screen. In the display on the front panel of the DVD player will be shown...

if you have inserted a DVD:

•"DVD"

•the number of the currently playing title and chapter

•the played back so far time of the currently playing DVD in hours, minutes and seconds

if you have inserted a VCD/S-VCD:

•"VCD" or "S-VCD"

•the number of the currently playing title

•the played back so far time of the currently playing VCD/S-VCD in hours,minutes and seconds

10.1.Features during playback of a DVD, VCD or S-VCD During the playback of a DVD/VCD/S-VCD you can use the following DVD player features...

Pause playback

To pause the playback of the inserted DVD/VCD/S-VCD...

• During playback press the button / "Play/Pause" on the front panel of the DVD player or the

button "Pause/Step" on the remote control.

"" will now appear in the display on the front panel of the DVD player, "Pause" will be displayed on the television screen.

On the screen, you will see a paused image of the currently displayed scene.

• Press the button "Pause/Step" on the remote control to jump to the next image.

•To continue with the playback of the film press the button "Play".

- 15 -