Miele G 5280, G 5285 manual Cleaning the spray arms, Removing the spray arms

Page 55

Cleaning and Care

Cleaning the spray arms

Sometimes particles of food get stuck in the spray arm jets. The spray arms should be inspected and cleaned every 4 - 6 months.

￿Turn off the dishwasher before cleaning.

Removing the spray arms

￿Remove the cutlery tray (if present).

￿Push the upper spray arm up to engage the inner ratchet and unscrew the spray arm.

￿Lift up the middle spray arm, ￿, to engage the ratchet and unscrew the spray arm, ￿.

￿Remove the lower basket.

￿Pull the lower spray arm firmly upwards to remove.

￿Use a pointed object such as a toothpick to push food particles into the spray arm jets.

￿Rinse thoroughly under running water.

￿Return the spray arms and check that they rotate freely.

55

Image 55
Contents Operating Instructions Dishwasher 5280 G Contents Important Safety InstructionsContents Correct usage Electrical SafetyInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Disposal of an old machine Caring for the environmentEnergy saving washing Disposal of the packing materialTo open the door Before using for the first timeTo close the door Water hardness Water hardness factory setting is 15d 16 gr/galDisplaying and setting the water hardness Filling the salt container Salt indicator Deactivating refill indicators Adding rinse aid Rinse aidRinse aid indicator Setting the rinse aid dosage Loading the dishwasher Glassware Items not recommended for dishwashingSilver and aluminum Typical load for 10 place settings with cutlery tray Typical load for 16 place settings with cutlery tray Upper basket Adjustable cup rackAdjusting the upper basket Heavily soiled items Lower basketDishwasher with cutlery tray Dishwasher with cutlery basket MultiComfort zone Cutlery tray Cutlery insert for the cutlery basket Cutlery basketMieleCare Collection Optional accessoriesDetergent UseAdding detergent Selecting a program Turning the dishwasher onStarting a program Program guide When to use Program sequence Standby Time displayPreparing your appliance for an extended vacation At the end of a programChanging a program Interrupting a programTurbo Additional optionsDelay start time shown in the time display Delay startStarting a program before Delay start has elapsed Buzzer Optimize Standby Factory defaults Technical faults Frequently Asked QuestionsFaults in the water intake or water drain General problems with the dishwasher Sounds Glasses Poor cleaning resultsProblem Possible fault Solution Dishes are not CleanWhite residue is Problem Possible fault Solution Dishes are not dryCutlery are SpottedDiscolored film Problem Possible fault Solution Glasses have aBrown or blue Discoloration film Cannot be wiped off Glasses are dullMieleCare After sales servicePC Update RepairsPage User Maintenance Instructions Door and the door seal Cleaning and CareExterior Wash cabinetTriple filter system Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the drain pump and non-return valve Installation Instructions Grounding Instructions Electrical connectionGrounding Instructions This Appliance Must be Grounded Hardwired electrical connectionPlumbing Drainage PlumbingVenting the drainage system Noise measurement Installation requirements for measuring noiseGeneral requirements for measuring noise Noise measurement Alteration rights reserved Nr 510 221 G5280/G5285
Related manuals
Manual 64 pages 2.2 Kb