Before using for the first time
Press the button to turn the dishwasher on.
A Welcome screen shows when the dishwasher is turned on for the first time.
Language
The display changes automatically to the language setting.
Select the desired language and confirm with the center button.
The selected language set is marked with a check.
Water hardness
The display changes to the water hardness setting.
To achieve good cleaning results, the dishwasher needs soft water. Hard water results in calcium deposits on dishware and in the dishwasher.
If your tap water hardness is above 4 °d (4 gr/gal [US]), the water should be softened.
–Your local water authority will be able to advise you of the water hardness level in your area.
–The dishwasher must be programmed to correspond to the water hardness in your area.
–In areas where the water hardness fluctuates (e. g. 37 - 50 °d
[39
If there is a fault, it will help the service technician to know the hardness of your local water supply.
Please note your water hardness below:
°d (gr/gal)
The water hardness was programmed at 1 °d (1 gr/gal) by factory default.
Select the hardness of your water supply and confirm with the center button.
See "Settings - Water hardness" for more information.
Two notes appear in the display.
After confirming these notes, Add
rinse aid and/or Add salt may
appear in the display.
Confirm these notes. The display changes to the Main menu.
These basic settings are saved after the first full program cycle is completed.
12