Miele G 5505, G 5510, G 5500, G 5515 manual Frequently Asked Questions, Technical faults

Page 45

Frequently Asked Questions

Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.

Technical faults

	Problem	Possible fault	Solution
	After the dishwasher	The machine is not	Insert the plug.
	was turned on with the	plugged in.
	button, the display	The circuit breaker has	Reset the circuit breaker.
	stays off and the "Start	The circuit breaker has	Reset the circuit breaker.
	stays off and the "Start	tripped.	See the data plate for
	/ Stop" indicator does		minimum amperage.
	not flash.		minimum amperage.
	not flash.
	The dishwasher stops	The circuit breaker has	– Reset the circuit breaker.
	during a program.	tripped.		See the data plate for
				minimum amperage.
			– If the circuit breaker trips
				again. Contact Miele.
	One of the following faults appears on the		Before fixing the fault:
	display:		– Press the button to
				turn the dishwasher off.
	Fault FXX	There may be a technical	After a few seconds:
		fault.	– Turn the dishwasher on.
			–	Select the desired
				program.
			–	Press the Start / Stop
				button.
			If the fault is indicated
			again, a technical fault has
			occurred.
			–	Contact Miele.
	Waterproof	The waterproof system	– Turn off the water supply.
		has activated.	–	Contact Miele.

45

Image 45

Contents Operating Instructions Dishwasher 5500 G 5505 G 5510 G Contents Contents Correct usage Electrical SafetyInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Energy saving washing Caring for the environmentBefore using for the first time To open the door Child safety lockTo close the door Display Functions Settings menuWater hardness LanguageFilling the salt container Refill salt message Adding rinse aid Rinse aidRinse aid indicator Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings Typical load for 16 place settings Upper basket Foldable spikesHinged cup rack Universal support bar Jumbo cup rackAdjusting the height Adjusting the upper basket Lower basket To remove the insert Removable MultiComfort insertTo replace the insert Glass rackFoldable spikes Split cutlery tray CutleryCutlery insert for the cutlery basket Cutlery basketMieleCare Collection Optional accessoriesDetergent UseAdding detergent Turning on Selecting a programStarting a program Program Guide Program When to use Program sequenceStandby Time displayPreparing your appliance for an extended vacation At the end of a programChanging a program Interrupting a programAdditional options Intensive lower basketTurbo Starting a program before the Delay start has elapsed Delay startLanguage Settings menuWater hardness Optimize standby Soak Refill indicatorsPre-rinse Extended dryingLeaving the Settings menu Factory defaultContrast Filter checkTechnical faults Frequently Asked QuestionsFaults in the water intake/water drain Problem Possible fault Solution One of the followingFaults appears on General problems with the dishwasher Sounds Poor cleaning results Glasses Problem Possible fault Solution Dishes are not dryCutlery are SpottedBrown or blue Problem Possible fault Solution Glasses have aDiscoloration film Cannot be wiped off Glasses are dull Discolored filmPC Update After sales serviceRepairs MieleCareTransport Page User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealTriple filter system Cleaning the triple filterCleaning and Care Removing the spray arms Cleaning the spray armsCleaning the drain pump and non-return valve Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Grounding Instructions Electrical connectionGrounding Instructions This Appliance Must be Grounded Hardwired electrical connectionConnection to the water supply PlumbingVenting the drainage system Drainage