Miele G 5510 Contrast, Filter check, Showroom program, Factory default, Leaving the Settings menu

Page 44

Settings menu

Contrast

There are seven different display contrast settings.

￿Select the desired contrast and confirm with the center button.

Filter check

This selection allows you to set the number of cycles run before the filter check message shows.

You can select between 30 and 60 cycles.

The "Filter check" message is set by default to 50 cycles.

￿Select the desired interval and confirm with the center button.

Showroom program

Only for showrooms.

The dishwasher has a demo program for dealer's showrooms.

Demo with wash sound:

The program activates the pumps to demonstrate the wash sound.

Turning the demo mode on

￿Select the desired option.

￿Select the option On and confirm with the center button.

￿Close the Settings menu.

￿Press the Start / Stop button.

Demo mode will begin.

Turning the demo mode off

Demo mode will turn off automatically when it reaches the end of the cycle.

Factory default

If you have altered any settings from the factory default, you can reset them to the factory default settings.

￿Select Reset and confirm with the center button.

Leaving the Settings menu

Use Close to leave the Settings menu.

￿Select Close and confirm with the center button.

The display will then show the last program selected and the indicator light for the program selected will come on.

44

Image 44
Contents Operating Instructions Dishwasher 5500 G 5505 G 5510 G Contents Contents Electrical Safety Correct usageInstallation Use Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingTo close the door Before using for the first timeTo open the door Child safety lock Settings menu Display FunctionsLanguage Water hardnessFilling the salt container Refill salt message Rinse aid Adding rinse aidRinse aid indicator Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings Typical load for 16 place settings Hinged cup rack Upper basketFoldable spikes Jumbo cup rack Universal support barAdjusting the height Adjusting the upper basket Lower basket Removable MultiComfort insert To remove the insertTo replace the insert Glass rackFoldable spikes Cutlery Split cutlery trayCutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Starting a program Turning onSelecting a program Program When to use Program sequence Program GuideTime display StandbyAt the end of a program Preparing your appliance for an extended vacationInterrupting a program Changing a programTurbo Additional optionsIntensive lower basket Delay start Starting a program before the Delay start has elapsedSettings menu LanguageWater hardness Optimize standby Refill indicators SoakPre-rinse Extended dryingFactory default Leaving the Settings menuContrast Filter checkFrequently Asked Questions Technical faultsFaults appears on Faults in the water intake/water drainProblem Possible fault Solution One of the following General problems with the dishwasher Sounds Poor cleaning results Problem Possible fault Solution Dishes are not dry GlassesCutlery are SpottedProblem Possible fault Solution Glasses have a Brown or blueDiscoloration film Cannot be wiped off Glasses are dull Discolored filmAfter sales service PC UpdateRepairs MieleCareTransport Page User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealCleaning the triple filter Triple filter systemCleaning and Care Cleaning the spray arms Removing the spray armsCleaning the drain pump and non-return valve Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage system