Miele G 5500, G 5510, G 5505, G 5515 manual Rinse aid, Optimize standby

Page 42

Settings menu

Rinse aid

For best results the rinse aid dosage can be adjusted.

The dosage can be set between 0-6 ml. The factory default dosage setting is

3 ml rinse aid.

The amount of rinse aid dispensed may be more than the value set due to the automatic adjustment of the "Sensor Wash" program.

If spots appear on the dishes:

– Use a higher setting for rinse aid.

If smearing or streaking show:

– Use a lower setting for rinse aid.

￿Select the desired rinse aid amount and confirm with the center button.

Optimize standby

A few minutes after the last key is pressed or at the end of the program the dishwasher will switch into Standby mode to save energy. The display and the indicators are turned off and only the Start/Stop indicator light flashes slowly.

If the dishwasher is not turned off after the program ends, it will turn completely off after a few minutes in Standby mode.

This function can also be turned off. The display and the indicators stay on and the dishwasher will turn off after approx. 6 hours.

￿Select the desired setting and press the center button.

If refill salt and/or rinse aid or a fault are present in the display, the dishwasher will not turn off.

The refill messages can be turned off when you use a tab detergent (see "Settings-Refill indicators"). Fault messages cannot be turned off.

42

Image 42
Contents Operating Instructions Dishwasher 5500 G 5505 G 5510 G Contents Contents Electrical Safety Correct usageInstallation Use Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingBefore using for the first time To open the door Child safety lockTo close the door Settings menu Display FunctionsLanguage Water hardnessFilling the salt container Refill salt message Rinse aid Adding rinse aidRinse aid indicator Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings Typical load for 16 place settings Upper basket Foldable spikesHinged cup rack Jumbo cup rack Universal support barAdjusting the height Adjusting the upper basket Lower basket To replace the insert Removable MultiComfort insertTo remove the insert Glass rackFoldable spikes Cutlery Split cutlery trayCutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Turning on Selecting a programStarting a program Program When to use Program sequence Program GuideTime display StandbyAt the end of a program Preparing your appliance for an extended vacationInterrupting a program Changing a programAdditional options Intensive lower basketTurbo Delay start Starting a program before the Delay start has elapsedSettings menu LanguageWater hardness Optimize standby Pre-rinse Refill indicatorsSoak Extended dryingContrast Factory defaultLeaving the Settings menu Filter checkFrequently Asked Questions Technical faultsFaults in the water intake/water drain Problem Possible fault Solution One of the followingFaults appears on General problems with the dishwasher Sounds Poor cleaning results Cutlery are Problem Possible fault Solution Dishes are not dryGlasses SpottedDiscoloration film Cannot be wiped off Glasses are dull Problem Possible fault Solution Glasses have aBrown or blue Discolored filmRepairs After sales servicePC Update MieleCareTransport Page User Maintenance Instructions Wash cabinet Cleaning and CareExterior Door and the door sealCleaning the triple filter Triple filter systemCleaning and Care Cleaning the spray arms Removing the spray armsCleaning the drain pump and non-return valve Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage system