Miele G 5505, G 5510, G 5500, G 5515 manual Interrupting a program, Changing a program

Page 37

Use

Interrupting a program

A program is interrupted as soon as the door is opened.

If the door is closed again, the program will continue from where it was interrupted.

Water in the dishwasher is hot. Danger of scalding.

Only open the door if absolutely necessary and exercise extreme caution when doing so. Before closing the door again, leave it ajar for approx. 20 seconds. This will enable the temperature in the wash cabinet to settle. Close the door firmly until it clicks into place.

Changing a program

If the detergent dispenser flap is already open, do not change the program.

If a program has already started and you wish to change it:

Press the "Start / Stop" button for at least one second.

The program is canceled.

Select and start the desired program.

37

Image 37

Contents Operating Instructions Dishwasher 5500 G 5505 G 5510 G Contents Contents Correct usage Electrical SafetyInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Energy saving washing Caring for the environmentTo open the door Child safety lock Before using for the first timeTo close the door Display Functions Settings menuWater hardness LanguageFilling the salt container Refill salt message Adding rinse aid Rinse aidRinse aid indicator Loading the dishwasher Glassware Items not recommended for dishwashingSilver and aluminum Typical load for 10 place settings Typical load for 16 place settings Foldable spikes Upper basketHinged cup rack Universal support bar Jumbo cup rackAdjusting the height Adjusting the upper basket Lower basket To remove the insert Removable MultiComfort insertTo replace the insert Glass rackFoldable spikes Split cutlery tray CutleryCutlery insert for the cutlery basket Cutlery basketMieleCare Collection Optional accessoriesDetergent UseAdding detergent Selecting a program Turning onStarting a program Program Guide Program When to use Program sequenceStandby Time displayPreparing your appliance for an extended vacation At the end of a programChanging a program Interrupting a programIntensive lower basket Additional optionsTurbo Starting a program before the Delay start has elapsed Delay startLanguage Settings menuWater hardness Optimize standby Soak Refill indicatorsPre-rinse Extended dryingLeaving the Settings menu Factory defaultContrast Filter checkTechnical faults Frequently Asked QuestionsProblem Possible fault Solution One of the following Faults in the water intake/water drainFaults appears on General problems with the dishwasher Sounds Poor cleaning results Glasses Problem Possible fault Solution Dishes are not dryCutlery are SpottedBrown or blue Problem Possible fault Solution Glasses have aDiscoloration film Cannot be wiped off Glasses are dull Discolored filmPC Update After sales serviceRepairs MieleCareTransport Page User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealTriple filter system Cleaning the triple filterCleaning and Care Removing the spray arms Cleaning the spray armsCleaning the drain pump and non-return valve Installation Instructions Disposal of the packing material Help to protect the environmentDisposal of an old machine Grounding Instructions Electrical connectionGrounding Instructions This Appliance Must be Grounded Hardwired electrical connectionConnection to the water supply PlumbingVenting the drainage system Drainage