Miele ESW 5088-14 Before using for the first time, Cleaning and heating up for the first time

Before using for the first time

A display test is carried out for 10 seconds after the appliance has been installed and after a power cut. The fan comes on at the same time. The appliance cannot be used during this time.

Please stick the extra data plate for the appliance supplied with this documentation in the space provided in the "After sales service" section of this booklet.

Cleaning and heating up for the first time

^Remove any protective foil and sticky labels.

^Remove the anti-slip mat and, if applicable, the rack from the drawer, and sponge both with warm water and a little washing-up liquid. Dry using a soft cloth.

^Wipe the appliance inside and out with a damp cloth only, and then dry with a soft cloth.

^Replace the anti-slip mat and the rack (if applicable) in the drawer.

Then heat the empty drawer for at least two hours.

^Switch the appliance on by touching the On/Off s sensor.

^Touch the X sensor repeatedly until the s symbol lights up in the display.

^Touch the 6 sensor repeatedly until the LED on the far right lights up.

^Touch the T sensor repeatedly until 2h lights up.

^Close the drawer.

The warming drawer is fitted with a softclose self-closing mechanism.

The drawer is fitted with a contact switch, which ensures that the heating element and fan in the appliance only work when the drawer is closed.

13