Aligning the front of the food warming drawer
After building in the combination appliance, it may be necessary under certain circumstances to
–align the front of the food warming drawer.
–align the gap between the food warming drawer and the combination appliance.
^Remove screws a from the left and right side of the drawer front.
^Carefully lift the control panel out, taking care not to damage or pull on the cable, and place it on the floor of the drawer.
^Loosen the 2 screws b on the inside of the drawer front.
^Align the drawer front.
^Tighten the screws on the inside of the drawer front.
^Carefully replace the control panel, taking care not to damage or pull on the cable.
^Replace the 2 screws in the left and right side of the drawer front.
39