Miele EGW4060-14 operating instructions Cleaning and care, Cleaning the plate warmer, Non-slip mat

Page 11

Cleaning and care

Cleaning the plate warmer

Let the drawer cool before cleaning.

Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the plate warmer. They will damage the surface.

The exterior of the plate warmer can be cleaned with warm water and liquid dish soap applied with a soft sponge. Wipe dry using a soft cloth.

Stainless steel

Stainless steel surfaces can be cleaned using a non-abrasive stainless steel cleaner.

To help prevent resoiling, a conditioner for stainless steel can also be used. Apply sparingly with even pressure.

Non-slip mat

The mat can be removed to clean the bottom of the drawer.

^Clean the mat by hand with warm water and liquid dish soap.

^Dry thoroughly. Do not return the mat until it is completely dry.

11

Image 11
Contents Operating instructions Built-in Plate Warmer EGW Page Contents Installation Important Safety InstructionsUse Guide to the machine Before using the plate warmer Controls UseOperating Selecting a temperatureCapacity Warming timesNon-slip mat Cleaning and careCleaning the plate warmer Why are the dishes not warm enough? Possible fault Fix Frequently asked questionsAfter sales service Page Installation Instructions Disposal of an old appliance Help protect our environmentDisposal of the packing material Built-in measurement InstallationInstallation Safety Instructions Combinations EGW 40x0 Installation Installing the appliance Aligning the appliance front This Appliance Must be Grounded Electrical connectionPage All rights reserved/1206