Installation
Installing the appliance
^Set the plate warmer into the niche, push it all the way in and align it at a right angle.
^Open the drawer and fix the appliance with the two supplied screws at the side panels of the cabinet.
The installation kit contains 3 metal strips with adhesive on the back side.
Fix the metal strips on the plate warmer so that the gap between the appliance and the cabinet is sealed. This air cushion acts as insulation.
^Remove the protective foil from the adhesive on the metal strip.
^Align and fix the metal strips, according to the illustration, flush with the sides and the rear of the plate warmer.
^Install the combination appliance according to the manual supplied with that machine.
20