Miele EGW4060-14 operating instructions Use

Page 5

IMPORTANT SAFETY INSTRUCTIONS

Installation, repair and maintenance work should be

performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty.

Hardwiring the appliance should be performed by a certified

electrician in compliance with all local and national codes and requirements. The manufacturer cannot be held responsible for the damages caused by an inadequate electrical connection.

Before installation or service, disconnect the power supply to the

work area by removing the fuse, "tripping" the circuit breaker or unplugging the unit. Pull the plug not the cord.

Use

The plate warmer interior gets very hot when in use and remains hot

for some time once turned off.

Use heat-resistant pot holders when removing dishes. Be sure

that they are not damp or wet. Danger of steam burns!

Pull the drawer out all the way when removing dishes to avoid

touching hot drawer parts.

To prevent burns do not touch hot surfaces, use handles or knobs.

Do not let children access the appliance or its controls. Supervise

its use by the elderly or infirm.

Do not use the plate warmer to reheat, cook or keep food and

drinks warm. The condensation from food or drinks could lead to moisture damage in the appliance.

Do not lean or sit on the warming drawer. This will damage the

drawer. The drawer can hold a maximum of 55 lbs (25 kg).

Do not store anything in the warming drawer. Forgotten items

could melt or catch fire when the appliance is turned on. Flammable liquids and materials should never be stored in, above or under the plate warmer.

Do not use the plate warmer to heat the room. Due to the high temperatures radiated, objects left near

the appliance could be damaged.

Do not use a steam cleaner to clean this appliance. Steam could

penetrate electrical components and cause a short circuit. Pressurized steam may cause permanent damage to the surface and to components of the appliance, for which the manufacturer cannot accept responsibility.

To prevent injuries, do not use accessories not recommended by

Miele.

Do not install outdoors.

5

Image 5
Contents Operating instructions Built-in Plate Warmer EGW Page Contents Installation Important Safety InstructionsUse Guide to the machine Before using the plate warmer Controls UseOperating Selecting a temperatureCapacity Warming timesNon-slip mat Cleaning and careCleaning the plate warmer Why are the dishes not warm enough? Possible fault Fix Frequently asked questionsAfter sales service Page Installation Instructions Disposal of an old appliance Help protect our environmentDisposal of the packing material Built-in measurement InstallationInstallation Safety Instructions Combinations EGW 40x0 Installation Installing the appliance Aligning the appliance front This Appliance Must be Grounded Electrical connectionPage All rights reserved/1206