Installation
Electrical connection
The electrical installation instructions for any appliance installed in combination with the plate warmer must be observed.
When another appliance is installed in combination with the plate warmer to the same circuit breaker, operating both appliances at the same time may cause an overload. If in doubt consult a qualified electrician.
All electrical work should be done by a qualified technician, in strict accordance with national and local safety regulations.
Installation, repairs and other work by unqualified persons could be dangerous and may void the warranty.
Make sure power is not supplied to the appliance while installation or repair work is being performed.
WARNING:
THIS APPLIANCE MUST BE GROUNDED
Note to the installer
Please leave these instructions with the consumer.
Power supply
This appliance is equipped with an approx. 6 ft (approx. 1.8 m) long power cord with plug ready for connection to a 120 V, 15 A, 60 Hz power supply.
22