Installation Safety Instructions

Installation

Before installation make sure that the voltage and frequency listed on

the data plate correspond with the household electrical supply. This data must correspond in order to avoid risk of damage to the appliance. If in doubt, consult a qualified technician.

The electrical outlet should be easily accessible after installing the

unit.

Only install the plate warmer in combination with built-in

appliances recommended by the manufacturer. When installed with other appliances, the warranty is void since the manufacturer cannot guarantee the safe use of the plate warmer.

To install the plate warmer in combination with another

appliance, a built-in shelf must exist in the cabinet to support the weight of both appliances.

When installed in combination with another appliance, the plate

warmer must always be installed beneath the other appliance. The combination appliance can be set without a base directly onto the plate warmer. A shelf between the appliances is not necessary.

To install the combination appliance please see the manual

supplied with that machine.

This appliance is not designed for maritime use or for use in mobile

installations such as recreational vehicles or aircraft. However, under certain conditions it may be possible for an installation in these applications. Please contact the Miele Technical Service Department with specific requirements.

Built-in measurement

The appliance is available in two heights: The opening measurement

needed is the summary of the measurement of the plate warmer and the combination appliance.