Electrical connection
Electrical connection U.K.
The appliance is supplied with a mains cable and moulded plug ready for connection to an a.c. single phase 220 – 240 V 50 Hz supply.
The fuse rating is 13 amps.
All electrical work should be carried out by a suitably qualified and com- petent person in accordance with lo- cal and national safety regulations.
Connection should be made via a fused plug and suitable switched socket which is easily accessible.
For extra safety it is advisable to in- stall a residual current device (RCD) with a trip current of 30 mA (in accordance with DIN VDE 0664, VDE 0100, Section 739).
Do not connect the appliance to the mains electricity supply by an extension lead. Extension leads do not guarantee the required safety of the appliance (e.g. danger of overheating).
The appliance must not be connected to an inverter and must not be used with a plug adapter as these can cause damage to the appliance’s electronic unit.
Important
The wires in the mains lead are col- oured in accordance with the following code:
Green/yellow | = earth |
Blue | = neutral |
Brown | = live |
As the colours of the wires in the mains lead of this appliance may not corre- spond with the coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured green and yellow must be connected to the termi- nal in the plug which is marked with the letter E or by the earth symbol (z) or coloured green or green and yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
WARNING
THIS APPLIANCE MUST BE
EARTHED
34