The correct temperature
When pressing the buttons the follow- ing are shown in the display:
–When first pressed: The last temperature selected flashes.
–Each subsequent press of the but- ton:
adjusts the temperature shown in 1 °C steps.
–Keeping the button pressed in: ad- justs the temperature continually.
Approx. 5 seconds after letting go of the button the current actual tempera- ture of the refrigerator or freezer is auto- matically shown.
If you have adjusted the temperature, wait for approx. 6 hours if the appli- ance is not very full and for approx.
24 hours if the appliance is full before checking the temperature display as it will take this long for the display to show the accurate temperature of the appliance. If, after this time, the temper- ature is too high or too low, you will need to adjust it again.
Temperature range
The temperature can be adjusted:
–in the refrigerator section from 2 °C to 11 °C
–in the freezer section from
The ambient temperature in the room and the installation location can affect the time it takes for the appliance to reach the lowest temperture. If the am- bient temperature is too high, the appli- ance may not reach the lowest temper- ature.
Temperature displays
During normal operation the tempera- ture display shows the temperature in the middle of the refrigerator section and the temperature in the warmest part of the freezer section.
If the temperature in the appliance is not within the range that the appliance is able to display (i.e. if it is not between 0 °C and 19 °C in the refrigerator sec- tion, and if the temperature in the freezer section is above 0 °C), only a bar will light up in the temperature dis- plays.
It will take between 3 and 8 hours ap- proximately for the appliance to reach the required temperature. The time it takes will depend on where the appli- ance is located and the temperature setting selected.
14