Changing the door hinging
The appliance is supplied right hand hinged. If left hand door hinging is re- quired follow the instructions below.
^ Open the lower appliance door. |
^Use a screwdriver to lever the plinth fascia a out, then pull it forwards and off.
^Use a screwdriver to remove cover b, then close the door.
^Remove screw c completely.
^Pull door support d together with hinge pin e downwards, then tilt it forwards and take it off.
^Open the lower appliance door, move it downwards and take it off.
^With the upper door g closed, pull hinge pin f downwards to remove it.
^Open the upper door, and pull it downwards and off.
^Remove the cover plate a.
^Unscrew bearing block b and place it on the other side (see illustration).
^Unscrew upper hinge pin c using the spanner supplied and refit on the oppositie side.
^Place cover plate a on the other side.
^Exchange cover i in the middle of the appliance with hinge bracket e. To do this:
Undo screws h, pull cover i and hinge bracket e off to the side, turn around and refit into position on the opposite side.
38