Vulcan-Hart VG24 Flue Connections, Electrical Connections Convection Oven Models 90 Series only

Page 16

FLUE CONNECTIONS

DO NOT obstruct the flow of flue gases from the flue located on the rear of the range. It is recommended that the flue gases be ventilated to the outside of the building through a ventilation system installed by qualified personnel.

From the termination of the flue to the filters of the hood venting system, a minimum clearance of 18" (457 mm) must be maintained.

Information on the construction and installation of ventilating hoods may be obtained from the standard for the "Removal of Vapors from Commercial Cooking Equipment”, NFPA No. 96 (latest edition), available from The National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.

ELECTRICAL CONNECTIONS (CONVECTION OVEN MODELS [90 SERIES] ONLY)

WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES.

WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW LOCKOUT / TAGOUT PROCEDURES.

WARNING: APPLIANCES EQUIPPED WITH A FLEXIBLE ELECTRIC SUPPLY CORD ARE PROVIDED WITH A THREE-PRONG GROUNDING PLUG. IT IS IMPERATIVE THAT THIS PLUG BE CONNECTED INTO A PROPERLY GROUNDED THREE-PRONG RECEPTACLE. IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN. DO NOT REMOVE THE GROUNDING PRONG FROM THIS PLUG.

The range is designed for 120 volt power supply or an optional 240 volt single-phase 15 Amp power supply.

All 120 volt ranges are supplied with a flexible electric supply cord and plug and must be plugged into the proper receptacle before turning on gas. If the appliance is not equipped with a grounding plug and electric supply is needed, ground the appliance by using the ground lug provided. All 240 volt electric systems are manufactured for hard wire installation connections. (Refer to the wiring diagram inserted into this manual.) An electrical diagram is attached to the back near the motor mounting area.

Do not connect the range to electrical supply until after gas connections have been made.

— 16 —

Image 16
Contents Installation Important for Your Safety For Your SafetyTable of Contents GAS Restaurant Range Models Optional Field Installable Accessories Description OptionsUncrating InstallationLocation Installation Codes and Standards AssemblyUnited States of America CanadaInstallation of Standard Griddle Top Bricks Installation of Broiler/Griddle BricksBumper Bars Convection Oven Ranges Only Page Page Installation of Hot Top Bricks BacksplashBacksplash Component Parts ModelsPage Leveling GAS ConnectionsTesting the GAS Supply System Flue Connections Electrical Connections Convection Oven Models 90 Series onlyOperation ControlsBefore First USE Griddle SeasoningComplete Shutdown Hot Top and Griddle Top BurnersOpen Top Burners Broiler/Griddle Standard OvenStandard Oven with Spark Ignition Fig Convection Snorkel Oven 90 Series OnlyConvection Snorkel Oven With Spark Ignition Fig Rack Arrangement Standard Oven Rack Arrangement Convection Oven 90 Series onlyArrangement #1 Arrangement #2Inserting and Removing Standard and Convection Oven Racks Preheating Convection Oven 90 Series OnlyHot Top Burners Loading and Unloading Standard and Convection OvensCooking Chart Roasting Temperatures and Times Product Approximate TimeStanding Rib Roast MINProduct Temperature Reheating Prepared Foods CasserolesMiscellaneous Products Approximate Time Temperature Special Baking ProceduresCleaning RangesWeekly Convection Ovens 90 Series onlyOven Door Gasket 90 Series Connection Ovens Only Griddle PlateDaily Maintenance Oven Door Gasket Replacement Convection Oven 90 Series onlyService and Parts Information LubricationTroubleshooting Guide TOP Burner Operation

260L, 160L, 36L, 60L, 48L specifications

Vulcan-Hart is a trusted name in the commercial kitchen equipment industry, renowned for its high-quality products designed to meet the demanding needs of foodservice operators. Among their distinguished offerings are the Vulcan-Hart VG series of gas burners: VG48, VG160, VG36, VG24, and VG60. These models are tailored for various cooking applications, ensuring versatility and reliability in any kitchen setting.

The Vulcan-Hart VG series features powerful, efficient burners that deliver consistent heat for optimal cooking performance. Each model's output varies based on its size, with the VG160 boasting the highest BTU output, capable of handling heavy-duty cooking requirements, while the smaller VG24 model suits establishments with limited space or lower volume cooking needs. Despite size differences, all models are designed to provide a high level of energy efficiency, which translates into lower operating costs for foodservice operators.

One of the standout features of the VG series is its heavy-duty construction. Built with stainless steel exteriors, these burners are not only aesthetically pleasing but also durable, resisting corrosion and wear from daily use. The cast iron grates provide excellent heat retention and distribution, ensuring that food cooks evenly and efficiently. Additionally, the open burner design allows for easy cleaning and maintenance, a critical factor in busy kitchens.

Technologically, the Vulcan-Hart VG series incorporates innovative features such as adjustable burner flames, allowing chefs to control heat levels precisely. This flexibility is essential for various cooking methods, from simmering sauces to boiling pasta. The series also includes models compatible with various gas types, ensuring that operators can choose what best fits their establishment's needs.

Safety is another priority within the VG series design. Each burner is equipped with a flame failure safety feature which automatically shuts off gas flow if the flame goes out. This enhances safety in high-pressure kitchen environments, providing peace of mind for operators and staff alike.

In summary, Vulcan-Hart VG48, VG160, VG36, VG24, and VG60 models are synonymous with performance, durability, and safety. They represent the best in commercial cooking technology, catering to a wide range of operational requirements while maintaining efficiency and reliability. For any foodservice operator seeking quality and dependability in their cooking equipment, the Vulcan-Hart VG series is an excellent choice.