Shortening Life, Daily Filtering | Vulcan-Hart EF4 ML-114943

SHORTENING LIFE

Shortening life may be extended by following these guidelines:

•Do not salt foods over the fryer.

•Use good quality shortening.

•Filter shortening at least daily.

•Replace shortening if it becomes poorly flavored.

•Keep equipment and surroundings clean.

•Set thermostats correctly.

•Remove excess moisture and particles from food products before placing in fryer.

Add approximately 15% new oil daily. Keep level of shortening at oil level line in fry tank. Add fresh shortening as needed.

DAILY FILTERING

Turn gas valve OFF when draining or filling.

The shortening should always be filtered while liquefied. A cold fryer will not drain properly because the shortening under the cold zone tube area will remain hard, even if the heat is on for a few minutes. If necessary, the clean-out rod may be used to carefully stir up hard fat to an area above the cold zone where it will melt. After the cold zone is liquefied, turn the fryer thermostat and gas valve OFF.

Shortening life will be extended by filtering at least once a day or more often if conditions warrant. A commercial power filter (available from other manufacturers) may be used. Follow the manufacturer's operating instructions for draining, straining, and replacing shortening in the fry tank.

Another way to filter is to drain the shortening from the drain pipe through a filter bag, or cover the receiving container with cheesecloth or other filtering material.

Filtering Procedure

1.Turn the fryer OFF.

2.Slowly remove the baskets, especially if shortening is hot, to prevent splashing.

3.Open the fryer door and attach the drain pipe to the drain valve.

4.Select a container of sufficient capacity and place it below the drain pipe.

5.If you are using a filter bag, tie it securely to the drain pipe. If other filter medium is used, place it in the container.

6.Open the drain valve carefully so the oil stream is directed through the filter.

— 10 —

EF3 ML-52099, EF4 ML-114943, EF5 ML-114944 specifications

Vulcan-Hart, a respected leader in commercial kitchen equipment, offers a range of high-performance electric fryers, including the EF5 ML-114944, EF4 ML-114943, and EF3 ML-52099 models. Each of these fryers is designed to meet the demands of busy kitchens while delivering exceptional cooking results and energy efficiency.

The Vulcan-Hart EF5 ML-114944 fryer is a powerful unit that features a five-gallon oil capacity for high-volume frying. Its robust heating elements, positioned for optimal heat transfer, ensure even cooking and can handle varying food loads with ease. The unit includes intuitive electronic controls that allow chefs to set precise temperatures, reducing the risk of overcooking or undercooking foods. Additionally, the built-in filtration system helps maintain oil quality by minimizing the breakdown of oil, which can also lead to cost savings in oil replenishment.

Similarly, the EF4 ML-114943 model is tailored for establishments that require rapid cooking while maintaining food quality. This four-gallon fryer maintains quick recovery times due to its high-output heating elements. The fryer is also equipped with a user-friendly interface, enabling operators to monitor and adjust cooking times efficiently. Features such as safety mechanisms and a front-mounted drain make cleaning and oil disposal straightforward, enhancing productivity in fast-paced kitchen environments.

The EF3 ML-52099 fryer rounds out this trio of efficiency-driven fryers. Built with three gallons oil capacity, this model appeals to smaller kitchens or those looking to diversify their menu without sacrificing space. Despite its smaller size, the EF3 model guarantees robust performance with its advanced heat distribution technology. This ensures that all menu items, from fries to chicken, come out crispy and delicious. Moreover, the compact design of the EF3 makes it an ideal choice for outlets with limited kitchen space.

Across the Vulcan-Hart fryers, common features include solid-state temperature controls, enhanced safety features, and easy-to-access components for servicing. The fryers are built with durable materials that withstand the rigors of commercial use. Additionally, these fryers have energy-efficient designs that comply with the latest standards, helping reduce operational costs while minimizing environmental impact.

In summary, the Vulcan-Hart EF5 ML-114944, EF4 ML-114943, and EF3 ML-52099 models are outstanding choices for any commercial kitchen looking to enhance their frying capabilities. With their innovative technologies and user-friendly designs, these electric fryers are set to deliver quality performance and reliability for years to come.