Roberts Radio RD-45 manual Dynamic Range Control DRC settings DAB

Page 12

Dynamic Range Control (DRC) settings - DAB

DRC can make quieter sounds easier to hear when your radio is used in a noisy environment.

1.Press the On/Off button to switch on your radio.

2.Press and release the Menu button the display will show “Manual tune.”

3.Press the Tuning Up or Down buttons until the display shows "DRC value".

4.Press and release the Select button to enter adjustment mode.

5.Press the Tuning Up/Down buttons to select required DRC setting

(default is 0) .

DRC 0 DRC is switched off, Broadcast DRC will be ignored. DRC 1/2 DRC level is set to 1/2 that sent by broadcaster. DRC 1 DRC is set as sent by broadcaster.

6.Press and release the Select button to confirm the setting. The display will return to normal tuning mode.

3,5

4,6

Image 12

Contents RD-45 Contents Menu button Tuning Up button Info button LCD display Controls FrontControls Back Battery operation Using the AC adaptor Operating your radio DAB Secondary services DAB Selecting a station DABDisplay modes DAB Signal strength display DAB Finding new stations DABManual Tuning DAB Dynamic Range Control DRC settings DAB Operating your radio FM Manual tuning FM Display modes FM FM Stereo/MonoPresetting stations Software versionRecalling a preset Favourite buttonRecalling your favourite station System reset Headphone socket Line out socketDisplay backlight General Specifications Circuit FeaturesGuarantee Page Roberts Radio Technical Services