Roberts Radio RD-45 manual Software version, Presetting stations

Page 16

Software version

The software display cannot be altered and is just for your reference.

1.In FM mode, press the Menu button, the software version will appear on the display.

2.In DAB mode, press the Menu button and then press the Tuning Up or Down buttons until the software version appears on the display.

1

2

22

Presetting stations

There are 4 memory presets for each of the two wavebands.

1. Press the On/Off button to switch on your radio.

1

3

 

 

2. Tune to the required station as previously described.

3. Press and hold the required Preset button until the display shows e.g. Preset 1 saved. The station will be stored under the chosen preset button. Repeat this procedure for the remaining presets.

4.Stations stored in the memories may be overwritten by following the above procedure.

15

Image 16
Contents RD-45 Contents Menu button Tuning Up button Info button LCD display Controls FrontControls Back Battery operation Using the AC adaptor Operating your radio DAB Secondary services DAB Selecting a station DABDisplay modes DAB Signal strength display DAB Finding new stations DABManual Tuning DAB Dynamic Range Control DRC settings DAB Operating your radio FM Manual tuning FM Display modes FM FM Stereo/MonoPresetting stations Software versionFavourite button Recalling a presetRecalling your favourite station System reset Line out socket Headphone socketDisplay backlight General Specifications Circuit FeaturesGuarantee Page Roberts Radio Technical Services