Roberts Radio RD-45 manual Manual tuning FM

Page 14

Manual tuning - FM

1.Press the On/Off button to switch on your radio.

2.Press the FM/DAB button to select the FM band. Fully extend the Telescopic aerial.

3.Press either the Tuning Up or Down buttons to tune to a station.

The frequency will change in steps of 50kHz.

4.When the waveband end is reached the radio will recommence tuning from the opposite waveband end.

5.Rotate the Volume control to the required setting.

6.To switch off your radio press the On/Off button.

1

2

3

3

5

13

Image 14
Contents RD-45 Contents Menu button Tuning Up button Info button LCD display Controls FrontControls Back Battery operation Using the AC adaptor Operating your radio DAB Secondary services DAB Selecting a station DABDisplay modes DAB Signal strength display DAB Finding new stations DABManual Tuning DAB Dynamic Range Control DRC settings DAB Operating your radio FM Manual tuning FM Display modes FM FM Stereo/MonoPresetting stations Software versionRecalling your favourite station Recalling a presetFavourite button System reset Display backlight Headphone socketLine out socket General Specifications Circuit FeaturesGuarantee Page Roberts Radio Technical Services