Roberts Radio RD-45 manual Headphone socket, Line out socket, Display backlight

Page 19

Headphone socket

A 3.5mm Headphone Socket located on the rear of your radio is provided for use with either headphones or an earpiece. Inserting a plug automati- cally mutes the internal loudspeaker.

IMPORTANT: Excessive sound pressure from earphones and headphones can cause hearing loss.

(Line out) socket

A 3.5mm Line out socket located on the rear of your radio is provided for connecting the audio signal to an external amplifier. Inserting a plug into the line output socket will not mute the internal loudspeaker. Set the volume control to adjust the speaker volume level as required.

Display backlight

1.When using on batteries, the display backlight will be switched on for approximately 12 seconds when any button is pressed.

2.When your radio is powered by AC mains the display backlight will always be switched on.

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

18

 

Image 19
Contents RD-45 Contents Controls Front Menu button Tuning Up button Info button LCD displayControls Back Battery operation Using the AC adaptor Operating your radio DAB Selecting a station DAB Secondary services DABDisplay modes DAB Finding new stations DAB Signal strength display DABManual Tuning DAB Dynamic Range Control DRC settings DAB Operating your radio FM Manual tuning FM FM Stereo/Mono Display modes FMSoftware version Presetting stationsFavourite button Recalling a presetRecalling your favourite station System reset Line out socket Headphone socketDisplay backlight General Circuit Features SpecificationsGuarantee Page Roberts Radio Technical Services