Operating your radio - FM
1.Carefully extend the telescopic aerial.
2.Press the On/Off button to switch on your radio. The display will show "Roberts digital radio" for a few seconds.
3.Press the FM/DAB button to select the FM band.
4.Press the Tuning Up button and then press the Auto Tune button your radio will scan in an upwards direction (low frequency to high frequency) and stop automatically when it finds a station of sufficient strength.
5.After a few seconds the display will update and show station name.
6.Press the Tuning Down button and then press the Auto Tune button to scan the FM band in a downwards direction (high frequency to low frequency).
7.When the waveband end is reached your radio will recommence tuning from the opposite waveband end.
8.Rotate the Volume control to the required setting.
9.To switch off your radio press the On/Off button.
If you need any further advice, please call our Technical Helpline on :-
2
3
4
6
4,6
020 8758 0338 | 12 |
|