Vulcan-Hart ML-136221-00G24 manual GAS Pressure Measurment, Regulator Troubleshooting

Page 18

REGULATOR TROUBLESHOOTING

SYMPTOM – UNIT WILL NOT MAINTAIN CONSISTENT PRESSURE

1.Check that vent limiter is not clogged by grease and debris

2.Check store gas pressure before regulator with all equipment on that line turned on and consuming gas

A.For natural gas should be between 7” and 14” W.C.

B.For propane gas should be between 12” and 14” W.C.

3.Check that regulator is installed in a horizontal, upright position

4.If no problems found in steps 1 – 3, replace the regulator

GAS PRESSURE MEASURMENT

1.Set the power on/off switch to the OFF position.

2.Turn the gas supply off at a manual shutoff valve.

3.Remove the control panel.

4.Remove the pressure tap plug from the far left/#1 burner port and attach manometer

5.Turn gas back on and turn power switch to the ON position

6.Turn all thermostats on to the maximum setting so that all burners are on.

7.Turn all the equipment on the same supply line on.

8.Check gas pressure

9.Gas pressure should read 5” W.C. for natural and 10” W.C. for propane gas.

10.Turn off the power switch.

11.Turn gas supply off, disconnect manometer and reinstall pressure tap plug.

12.Turn power switch and gas supply back on.

All gas joints disturbed during servicing must be checked for leaks. Check with a soap and water solution. Do not use an open flame.

FLAME SWITCH

PRESSURE TAP

SPARK

 

IGNITOR

 

MODULE

PRESSURE TAP AT #1 BURNER

- 18 -

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Heavy Duty Gas Griddles Thermostat Troubleshooting Table of ConentsBurner Removal Burner Adjustment General Installation Operation Cleaning LubricationSpecifications IntroductionComponent Location 948RE and AGE48 Control Panel Control Panel BullnoseThermostat Heat ShieldBack Panel Thermostat Troubleshooting Thermostat RemovalThermostat Calibration Power Switch Troubleshooting Power ON/OFF SwitchIndicator Light Power Switch RemovalFlame Switch Indicator Light RemovalPilot Hood Flame Switch Probe Ignitor Snap in Retainer Spark Igniter Module Spark Ignitor Removal Spark Ignitor TroubleshootingSolenoid Valves Input GAS Line Back Center Retaining ScrewPilot Solenoid Valve TroubleshootingBrass Pilot Valve Pilot Troubleshooting Solenoid Valve RemovalPilot Assembly Removal BurnerBurner Troubleshooting Burner AdjustmentBurner Removal Vent Limiter Regulator Installed in a HORIZONTAL, Upright PositionGAS Regulator CoverGAS Pressure Measurment Regulator TroubleshootingFlame Switch Pressure TAP Spark Pressure TAP AT #1 BurnerSequence of Operation From the Inside OUTWiring Diagrams Wiring Diagram 36-INCH Griddle Wiring Diagram 48-INCH Griddle Wiring Diagram 60-INCH Griddle Wiring Diagram 72-INCH Griddle

ML-136221-00G24 specifications

The Vulcan-Hart ML-136221-00G24 is a high-performance commercial griddle designed for efficiency and durability in busy kitchens. Known for its impressive features and advanced technology, this unit is a dependable choice for chefs and restaurant operators seeking a reliable cooking solution.

One of the standout features of the Vulcan-Hart ML-136221-00G24 is its spacious cooking surface, which provides ample space for preparing a variety of dishes simultaneously. The griddle measures 36 inches long, allowing for significant cooking area without taking up excessive kitchen space. With this size, operators can efficiently cook pancakes, burgers, or grilled vegetables all at once, improving workflow and productivity during peak service times.

The unit is constructed with high-quality stainless steel, ensuring durability and resistance to corrosion. This robust design enhances the griddle’s longevity, making it an investment that can withstand the rigors of a commercial kitchen environment. The smooth, polished surface also makes cleaning and maintenance straightforward, allowing kitchen staff to maintain a hygienic workspace effortlessly.

In terms of performance, the Vulcan-Hart ML-136221-00G24 features powerful, independently controlled burners that provide consistent heat distribution across the cooking surface. The griddle is equipped with a powerful thermostat that maintains precise temperature control, ensuring that food cooks evenly and efficiently. This level of accuracy is vital for professional chefs who require reliable heat to achieve perfect results.

Another key aspect of this griddle is its energy efficiency. The Vulcan-Hart ML-136221-00G24 is designed to consume less fuel while delivering exceptional cooking performance. This not only helps reduce operational costs but also aligns with modern sustainability practices, making it an environmentally conscious choice.

Additionally, the griddle comes with integrated grease troughs that facilitate easy disposal of cooking debris and excess grease, further enhancing cleanliness and operational efficiency. With a focus on functionality, the unit includes user-friendly controls, making it accessible for kitchen staff of all skill levels.

Overall, the Vulcan-Hart ML-136221-00G24 is an impressive commercial griddle that combines innovative technology with practical features. Its sturdy construction, spacious cooking area, precise temperature control, and emphasis on energy efficiency make it an essential tool for any professional kitchen looking to deliver high-quality meals efficiently.
Top Page Image Contents