CU1526, CU2026, CU3030
User Manual
Ice Storage Bin Removal
The ice storage bin is removable to allow access to the refrigeration system for service.
1.Remove front louvers. Remove left then right.
2.If the machine is in an ice making mode, push and release the Manual Harvest button to release any ice that might be on the evaporator.
3.Push and hold the controller's Off button to shut the machine off.
4.Remove all ice from the bin.
5.Disconnect electrical power.
6.Remove door (open about 1.5" and pull bottom out).
7.Remove the top panel, there are two fasteners under the front corners of the top. Back them out and lift the top up, push back slightly and lift panel up and off the machine..
Disconnect hose before moving bin.
8.Disconnect the drain tube from the bin drain fitting.
9.Remove two bolts from the bottom of the bin, one on the left and one on the right.
Remove bolt to release bin
10. Remove bolt from the back wall of the bin.
Remove bolt to release bin
11. Pull the bin forward and off the chassis.
May 2008
Page 7