Vulcan-Hart GDC60 ML-52584, GDC72 ML-52585, GDC36 ML-52582 Service and Parts Information

Page 13

5.Tighten all bolts and nuts firmly (do not overtighten), with 7/16 wrench, in numerical order as shown in the diagram (Fig. 7). CAUTION: Overtightening can deform the aluminum material of the platen.

The holes in the platen surface and the heads on the special bolts are eccentric. Make sure the head of each bolt fits into the hole in the platen surface and stays there until the nut is finger tightened.

6.Reinstall platen cover (Fig. 8)

Fig. 7

Fig. 8

SERVICE AND PARTS INFORMATION

To obtain service and parts information concerning this duplex cooker, contact the Vulcan-Hart Service Agency in your area (refer to listing supplied with the duplex cooker), or Vulcan-Hart Company Service Department at the address or phone number shown on the front cover of this manual.

— 13 —

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Installation For Your Safety Important for Your SafetyUnpacking InstallationLocation Assembly Installation Codes and StandardsStand Fig Testing the GAS Supply Piping SystemGAS Connections Electrical Data Electrical ConnectionsOperation Lighting Pilots on Griddles with Electric Ignition Before First USENormal Operation Preheat Griddle Cleaning the GriddleSeason Griddle Surface AT the END of the DAYAfter Each Use Care and Cleaning of the PlatenDuring The Day Once a DayCare of the Stainless Steel Housing MaintenanceReplacement of the Platen Surface Page Service and Parts Information Problem Possible Cause TroubleshootingProblem Possible Cause Form 30501 Rev. a
Top Page Image Contents