Vulcan-Hart GDC48 ML-52583, GDC72 ML-52585, GDC36 ML-52582, GDC60 ML-52584, GDC24 ML-52581 Operation

OPERATION

WARNING: THE DUPLEX COOKER AND ITS PARTS ARE HOT. BE CAREFUL WHEN OPERATING, CLEANING, AND SERVICING THE DUPLEX COOKER.

CONTROLS (Fig. 2)

Each griddle zone, one foot wide, and each platen has its own separate controls.

									TOP - SIDE
									COOKER HANDLE
			TWIN - CAM FEET
									PLATEN
									GRIDDLE
									SURFACE
									GREASE
									TROUGH
					MAIN ON / OFF SWITCH
		AMBER LIGHT							GREASE
									CONTAINER
									GRIDDLE
									CONTROLS
				ON / OFF SWITCH
	THERMOSTAT
								TOP- SIDE COOKER CONTROLS
										PL-40792-1
							Fig. 2
Main On-Off Switch					—	controls power to the pilot igniters.
On-Off Switch with indicator light					—	controls power to the thermostat/heater circuit.
Black Thermostat					—	controls griddle heaters (150-450°F). Each zone is one
						foot wide.
Amber Light					— indicates heat is being supplied to satisfy the thermostat.
Red Thermostat					—	controls heater to each platen (150-350°F).
Fuse					—	replace with same size and type.
Twin-Cam Feet					—	sets distance of the platen from the griddle surface. (Marked
						settings 3 - 16 are equivalent to 1/16" divisions. Unmarked
						intermediate divisions allow settings from 5/32" to 1" in
						32nds.)
Handle					—	lift handle to access griddle area.

— 7 —