Electrical Connections

When test pressures are 1/2 psig (3.45 kPa) or less, the cooker must be isolated from the gas supply piping system by closing its individual shutoff valve.

Make supply connections using insulated copper wire suitable for at least 90°C for the rated load. When initially selecting conduit size, keep in mind the possibility of additional platens being added to the duplex cooker at a later date.

The electrical diagram is attached to the hinged control panel cover.

Permanently Connected Duplex Cookers

WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES.

WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH TO INDICATE THAT YOU ARE WORKING ON THE CIRCUIT.

Cord Connected Duplex Cookers

WARNING: THE SUPPLY CORD ON THE GAS DUPLEX COOKER IS PROVIDED WITH A THREE- PRONG GROUNDING PLUG. IT IS IMPERATIVE THAT THIS PLUG BE CONNECTED INTO A PROPERLY GROUNDED THREE-PRONG RECEPTACLE. IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN. DO NOT REMOVE THE GROUNDING PRONG FROM THIS PLUG.

ELECTRICAL DATA

Total	Total				Loading KW								Nominal Amps./Line							Circuit

Platens	KW					Per Phase						240V				208V				Size *

Per	Conn.		240V 3 Ph.				208V 3 Ph.					3 Ph.		1 Ph.		3 Ph.		1 Ph.	240V		208V

GDC	240V	208V	L1-L3	L2-L3		L1-L3	L1-L2	L2-L3	L1-L3		L1	L2	L3	L1-L3	L1	L2	L3	L1-L3	3Ph.	1Ph.	3Ph.	1Ph.

1	2.67	2	2.67	0		0	2	0		0	10	10	0	11	9	9	0	10	15	15	15	15

2	5.34	4	2.67	2.67		0	2	2		0	10	20	10	26	9	17	9	19	25	35	25	25

3	8.01	6	2.67	2.67		2.67	2	2		2	20	20	20	34	17	17	17	29	25	45	25	40

4	10.68	8	2.67	2.67		5.34	2	2		4	29	20	29	45	25	17	25	39	40	60	35	50

5	13.35	10	5.34	2.67		5.34	4	2		4	39	20	39	56	34	17	34	48	50	70	45	60

6	16.02	12	5.34	5.34		5.34	4	4		4	39	39	39	67	34	34	34	58	50	90	45	80

*MINIMUM CIRCUIT AMPACITY AND MAXIMUM CIRCUIT BREAKER SIZE (AMPS.) compiled in accordance with The National Electrical Code (latest edition).

— 6 —