Vulcan-Hart VRT SERIES operation manual ERR TOO HOT Alarm Shutdown, Extended Shutdown

Page 11

VCH & VRT SERIES OVENS

 

F-41162 (07-10)

 

 

 

ERR TOO HOT – ALARM

 

SHUTDOWN

The oven reports an “Over Temperature Condition” any time the oven temperature reaches 400⁰F or higher.

When this condition exists, the oven will sound an audible alarm by emitting a triple beep (3 quick short beeps) every 2 seconds and it will flash the message “Err too Hot” on the display to alert nearby staff.

This audible alarm may be temporarily cancelled for 3 minutes by pushing the ADJ/SET Knob. After the 3 minutes have expired, the alarm will begin beeping again.

The Oven and its parts are hot. Be very careful when operating, cleaning, or servicing the oven.

1.Switch ON/OFF switch to OFF position.

2.Open door slightly to allow ventilation and a cool down period.

The oven’s cooling/exhaust fans located at the left side of the unit will operate until the thermostat sensor shuts them off.

The error message on the display cannot be cancelled. The proper action when this alarm is present is to

Turn the oven OFF, unplug the unit, and call for service.

10

EXTENDED SHUTDOWN

1.Perform the Shutdown procedure.

2.Unplug the oven.

3.After oven has cooled down, thoroughly clean the oven according to the Cleaning Procedure in this manual.

4.Leave the oven door(s) slightly open to allow ventilation and preservation of door gasket(s).

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Manufactured ModelsFor Your Safety Important for Your SafetyTable of Contents Principles Cook & Hold Ovens GeneralIntroduction VRT Model Benefits Cook & Hold OvensComparison Cook & Hold Ovens Location InstallationCleaning UnpackingElectrical Connections Electrical RequirementsUnited States of America CanadaManual Operation OperationControls Before First USEProgramming Setting AdjustmentQuick Cycle PRE-PROGRAMMED CyclesOperating Testing the OvenSwitch ON/OFF Switch to on Ventilation Hood RequirementsExtended Shutdown ERR TOO HOT Alarm ShutdownTurn the oven OFF, unplug the unit, and call for service Stainless Steel Care MaintenanceCleaning Door Gasket Door Gasket CarePreserving & Restoring Heat TintCooking Rack CookingFor Bakery Products Bakery ProductsTemp Guidelines Cooking and Holding GuideDetails Cook Hold Internal Loading Product Weight Oven Reheat Hold MIN. Hold Entrée Temp Time Rethermalization GuideVCH & VRT Series Ovens VCH & VRT Series Ovens Service & Parts Information Lockout / Tagout ProcedureSymptoms Possible Causes Remedy TroubleshootingVCH88 SpecificationsWiring Diagram

VRT SERIES specifications

Vulcan-Hart has established itself as a leader in commercial cooking equipment, and the VRT Series is a testament to their commitment to innovation and quality. This series of fryers is designed to meet the rigorous demands of busy kitchens while providing enhanced efficiency and performance.

One of the main features of the Vulcan-Hart VRT Series is its advanced fry tank design, which optimizes heat transfer and reduces oil degradation. This allows for consistent cooking results and prolongs the life of the frying oil, ultimately saving operators both time and money. The fryers are engineered with a high-efficiency heating system that ensures rapid recovery times, enabling high-volume frying without sacrificing food quality.

Incorporating state-of-the-art technology, the VRT Series features digital controls that provide precise temperature management. The intuitive interface allows operators to easily set and monitor cooking temperatures, which is essential for maintaining food safety standards and achieving perfect frying results. Additionally, the oil filtration system integrated into the VRT Series automates the process of filtering the oil, further enhancing oil life and improving the taste of the fried food.

Durability is another hallmark of the VRT Series. Built with heavy-duty stainless steel, these fryers are designed to withstand the rigors of a commercial kitchen environment. The robust construction not only enhances the aesthetic appeal but also ensures longevity and reliability.

Further adding to the practicality of the VRT Series, the fryers are designed with ease of maintenance in mind. The fry tanks are equipped with a clean-out rod that simplifies the cleaning process, allowing kitchens to maintain hygiene standards effortlessly.

Safety is a top priority in the design of the VRT Series. Features such as high limit temperature controls and automatic shut-off capabilities are standard, providing peace of mind for operators.

In summary, the Vulcan-Hart VRT Series combines efficiency, durability, and advanced technology to deliver a superior frying experience. Whether in a busy restaurant, cafeteria, or catering environment, these fryers stand out as an essential tool for achieving high-quality fried foods with optimal results. With a focus on innovation and performance, the VRT Series exemplifies what modern commercial cooking equipment should be.
Top Page Image Contents