Vulcan-Hart VW3D ML-126512, VW2SB ML-126503, VW1S ML-126500 General, Installation, Unpacking

Page 3

Installation, Operation and Care of

MODEL VW SERIES DRAWER WARMERS

PLEASE KEEP THIS MANUAL FOR FUTURE USE

GENERAL

Vulcan-Hart Drawer Warmers are produced with quality workmanship and material. Proper installation, usage, and maintenance of your drawer warmer will result in many years of satisfactory performance.

It is suggested that you thoroughly read this entire manual and carefully follow all of the instructions provided.

The VW Series Drawer Warmers provide an efficient means of holding a variety of prepared hot food products at proper temperatures until serving.

VW-S and VW-SB series have a large 15x20" (38x51cm) over-sized drawer insert.

VW-D, VW-C, VW-CB, and VW-DB series have a standard 12x20x4" (30x51x10 cm) steam table pan insert.

INSTALLATION

Before installing, verify that the electrical service agrees with the specifications on the rating plate located on the lower rear corner of the drawer warmer. If the supply and equipment requirements do not agree, do not proceed with the installation. Contact your Vulcan-Hart office immediately.

UNPACKING

This drawer warmer was inspected before leaving the factory. The transportation company assumes full responsibility for safe delivery upon acceptance of the shipment. Immediately after unpacking, check for possible shipping damage to the drawer warmer. If the drawer warmer is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.

Carefully unpack drawer warmer and place in a work-accessible area.

1.Remove banding material holding the carton to the pallet.

2.Remove cardboard carton and plastic bag covering drawer warmer.

3.Carefully lift drawer warmer off carton bottom and place it on the floor or table.

4.Remove legs from the drawer of the drawer warmer.

5.Secure legs to the bottom of the drawer warmer by screwing legs into the holes provided.

6.Remove any and all packaging materials in drawers.

– 3 –

Image 3
Contents Installation Table of Contents Installation GeneralUnpacking Canada Installation Codes and StandardsLocation United States of AmericaElectrical Table Model Voltage Phase Nema PlugWiring Diagrams VW1D,VW1DB,VW1S,VW1SB VW2D,VW2DB,VW2S,VW2SB VW3D,VW3DB,VW3S,VW3SB VW4D,VW4DB,VW4S,VW4SB VW1C,VW1CB VW2C,VW2CB Operation Controls FigBefore First USE Extended Shutdown Drawer Warmer TemperaturesOperating Drawer Warmer ShutdownDaily MaintenanceCleaning Service and Parts InformationForm 31086 Rev. a

VW4D ML-126514, VW1D ML-126508, VW4S ML-126506, VW3SB ML-126505, VW3DB ML-126513 specifications

Vulcan-Hart has long been a reputable name in the commercial kitchen equipment industry, known for producing high-quality cooking appliances that combine efficiency and durability. Their line of products, including the VW2SB ML-126503, VW1S ML-126500, VW2DB ML-126511, VW3D ML-126512, and VW1DB ML-126509, showcases an advanced array of features and technologies that cater to a variety of food service needs.

The VW2SB ML-126503 is particularly focused on versatility, designed with a powerful double burner system that allows for simultaneous cooking. Its robust construction includes heavy-duty stainless steel, providing not only durability but also ease of cleaning. The precise temperature control ensures that chefs can achieve consistent results, further enhancing the efficient workflow in busy kitchens.

Transitioning to the VW1S ML-126500, this model emphasizes space optimization without sacrificing performance. Designed for smaller kitchens and food trucks, it features a single burner with high output, making it perfect for frying or sautéing. Its compact design doesn't compromise on power, adapted to meet the demands of quick-service restaurants and catering operations.

The VW2DB ML-126511 offers a dynamic two-burner configuration suitable for high-volume cooking. It features advanced heat distribution technology, enabling even cooking across all pans. With its durable materials and solid construction, this model is ideal for establishments requiring reliability and performance under pressure.

The VW3D ML-126512 stands out with its three-burner setup, showcasing enhanced cooking capabilities. It boasts advanced safety features such as flame failure protection, which ensures that burners shut off automatically in case of flame extinguishment. This not only improves kitchen safety but also optimizes fuel consumption for cost efficiency.

Finally, the VW1DB ML-126509 complements the lineup with its single burner design that focuses on functionality without any frills. Ideal for small-scale operations or as an additional workstation, it efficiently supports a range of cooking methods while being user-friendly and easy to maintain.

In summary, the Vulcan-Hart VW series models represent the culmination of innovative design, safety, and performance, making them invaluable assets in any commercial kitchen environment. Their emphasis on efficiency, durability, and ease of use ensures that they can meet the diverse needs of culinary professionals across various food service sectors.