LIGHTING THE PILOT LIGHT
1.Turn on the main gas supply.
2.Turn on the burner valve and purge air from the line. Turn the burner valve off, wait five minutes.
3.Using a taper, light the pilots (Fig. 10).
4.If the pilots fail to light, turn off the gas, wait five minutes and repeat Steps 1 through 3.
5.Turn burner valve on for ignition.
PILOT
Fig. 10
Nightly Shutdown
Turn off the burner valve. The pilot will remain lit.
Seasonal Shutdown
1.Turn off the burner valve.
2.Turn off the pilots.
3.Turn off the main gas supply.
PREHEATING
Place the rack in its highest position. Turn the burner valve knob completely counterclockwise and preheat for 15 minutes.
RECIPE AND RACK ADJUSTMENT
Positioning the cheesemelter rack is an important factor in the desired product end results. Position the rack farther away from the burners for thick casseroles and for melting cheese or butter to avoid drying the product. Position the rack closer to the burners for bacon, toast and quick heating, but watch carefully to avoid burning.
— 10 —