![](/images/new-backgrounds/1074570/7457019x1.webp)
Pelican WF4/WF8 Premium Whole House Iron and Manganese | Rev R |
Filtration System | Page 10 |
|
|
|
|
Carbon Tank Wash
!IMPORTANT!
Do not perform the Carbon Tank Wash until the Carbon Tank Soak process is complete.
Notice:
Water will flow out of the downflow inlet side of the Bypass Valve during this process. Be sure you perform this series of steps in a location suitable for water flow.
Bypass Valve
Garden Water
Hose
Hose Bib
Assembly
INLET
DOWNFLOW
UPFLOW
INLET
Whole House Water Filter
Figure 4
1.Reattach the garden hose to the Hose Bib Assembly.
2.Slowly turn on the water 1/4 turn for this entire process.
3.Run water through the upflow inlet side of the Bypass Valve for
4.Turn off the water.
5.Remove the Hose Bib Assembly from the upflow inlet side and attach it to the downflow inlet side of the Bypass Valve.
6.Run the water through the downflow inlet side for 1 minute or until water runs clear.
7.Turn off the water.
8.Remove the Hose Bib Assembly from the Bypass Valve and disconnect the garden hose.
Note: Please save the Hose Bib Assembly as this will be used in the future for the carbon exchange.
© 2013 Enviro Water Solutions, Inc. | www.pelicanwater.com |
3060 Performance Circle, Suite 2, DeLand, FL 32724 | (877) |