Cleaning Troubleshooting Tips Consumer

Bottom edge of slot

Hinge arm

Notch stop

www.GEAppliances.com

Safety

The gasket is designed with a gap at the bottom to allow for proper air circulation.

Do not rub or clean the door gasket— it has an extremely low resistance to abrasion.

If you notice the gasket becoming worn, frayed or damaged in any way or if it has become displaced on the door, you should have it replaced.

Cleaning the Oven Door

To clean the inside of the door:

■Because the area inside the gasket is cleaned during the self-clean cycle, you do not need to clean this by hand.

■The area outside the gasket and the door liner can be cleaned with a soap-filled or plastic scouring pad, hot water and detergent. Rinse well with a vinegar and water solution.

To clean the outside of the door:

■Use soap and water to thoroughly clean the top, sides and front of the oven door. Rinse well. You may also use a glass cleaner to clean the glass on the outside of the door. Do not let water drip into the vent openings.

■If any stain on the door vent trim is persistent, use a soft abrasive cleaner and a sponge-scrubber for best results.

■Spillage of marinades, fruit juices, tomato sauces and basting materials containing acids may cause discoloration and should be wiped up immediately. When surface is cool, clean and rinse.

■Do not use oven cleaners, cleaning powders or harsh abrasives on the outside of the door.

Instructions Operating Instructions Care

Lift-Off Oven Door

and

Slot

Hinge lock

Pull hinge locks down to unlock.

Removal position

The door is very heavy. Be careful when removing and lifting the door.

To remove the door:

Fully open the door.

Pull the hinge locks down toward the door frame, to the unlocked position. A tool, such as a small flat-blade screwdriver, may be required.

Firmly grasp both sides of the door at the top. Do not lift the door by the handle.

Close door to the door removal position, which is halfway between the broil stop position and fully closed.

Lift door up and out until the hinge arm is clear of the slot.

To replace the door:

Firmly grasp both sides of the door at the top. Do not lift the door by the handle.

With the door at the

same angle as the removal position, seat the notch stop of the hinge arm

into the bottom

edge of the hinge slot. The notch in the hinge arm must be fully seated into the bottom of the slot.

Fully open the door until it is parallel to the floor. If the door will not fully open, the notch stop is not seated correctly in the bottom edge of the slot. Repeat step 2 if necessary.

Push the hinge locks up against the front frame of the oven cavity to the locked position.

Hinge arm

Hinge lock

Cleaning Troubleshooting Tips Consumer

Push hinge locks up to lock.

Close the oven door.

Support

JDP39 specifications

The GE JDP39 and JDS28 series, including model 131-10595-2 1-07 JR, represent significant advancements in the realm of electronic instrumentation and components, essential for various industrial applications. These models are part of General Electric's ongoing commitment to innovation and reliability in technology.

One of the standout features of the JDP39 and JDS28 models is their robustness in harsh environments. Designed with durability in mind, these devices can withstand extreme temperatures, humidity, and vibration, making them ideal for use in sectors such as aerospace, manufacturing, and power generation. The materials used in their construction ensure longevity and reliable performance under stress.

In terms of technology, the GE JDP39 model employs advanced signal processing capabilities. This enables high accuracy and rapid response times in measurement applications. The devices incorporate state-of-the-art sensors that provide precise data, which is crucial for monitoring and controlling various industrial processes. This level of precision is particularly beneficial in applications where safety and efficiency are paramount.

The JDS28 series is known for its user-friendly interface and ease of integration with existing systems. Designed with operators in mind, these devices feature intuitive controls and clear displays that ensure quick adaptation and minimal training period for users. Furthermore, they support various communication protocols, facilitating seamless integration into modern automated systems.

Power efficiency is another significant characteristic of the GE JDP39 and JDS28 models. With a focus on reducing energy consumption without compromising performance, these devices utilize advanced power management technologies. This not only lowers operational costs but also aligns with global initiatives aimed at promoting energy sustainability.

Additionally, GE has incorporated advanced diagnostic features into these models. Users can access real-time data and alerts regarding the operational status, enabling proactive maintenance and reducing downtime. This predictive capability is vital for organizations seeking to enhance their operational efficiency and minimize unexpected failures.

In conclusion, the GE JDP39, JDS28, and the 131-10595-2 1-07 JR model embody the intersection of durability, advanced technology, and user-friendly design. Their features make them an indispensable choice for industries requiring reliable instrumentation that can perform consistently under challenging conditions. As industries continue to evolve and embrace automation, these devices stand out as essential tools for achieving operational excellence.