GE JDP39 owner manual Instructions Care and Cleaning, Control Lockout, To lock/unlock the controls

Page 7

www.GEAppliances.com

Oven Control, Clock and Timer Features and Settings

Safety

AUTOMATIC OVEN Light

This lights anytime the oven has been programmed using the COOKING TIME or DELAY START functions.

– Pad

Short taps to this pad will decrease the time or temperature by small amounts. Touch and hold the pad to decrease the time or temperature by larger amounts.

CLEAR/OFF Pad

Touch this pad to cancel ALL oven operations except the clock and timer.

BROIL HI/LO Pad

Touch this pad to select the broil function.

BROIL Light

Flashes while in edit mode—you can switch from HI to LO BROIL at this point. Glows when the oven is in broil mode.

Instructions Operating

+ Pad

Short taps to this pad will increase the time or temperature by small amounts. Touch and hold the pad to increase the time or temperature by larger amounts.

SELF CLEAN Pad

Touch this pad to select the self-cleaning function. See the Using the self-cleaning oven section.

CLEAN Light

Flashes while in edit mode—you can change the length of time for the self-clean cycle at this point. Glows when the oven is in the self- clean cycle. After the self-clean cycle, the light will turn off. Unlatch the door.

Indicator Lights (on some pads)

EDIT mode lasts several seconds after the last pad press. DELAY START ON/OFF and COOKING TIME ON/OFF will be the only pads lit if either of these options is selected. (Example: DELAY START is selected with BAKE—theDELAY START pad will remain lit until the clock reaches the programmed time, at which point it will turn off and the BAKE/TEMP RECALL pad light will light up).

Instructions Care and Cleaning

CONTROL LOCK/UNLOCK

PRESS + AND – AND HOLD FOR 3 SECONDS

Control Lockout

Your control will allow you to lock out the touch pads so they cannot be activated when touched.

To lock/unlock the controls:

Touch the + and – pads at the same time for 3 seconds, until the display shows LOC ON.

To unlock the control, touch the + and – pads at the same time for 3 seconds, until the display shows

LOC OFF.

When this feature is on and the touch pads are touched, the control will beep and the display will show LOC ON.

■The control lockout mode affects all touch pads. No touch pads will work when this feature is activated.

■The adjustment will be retained in memory after a power failure.

Troubleshooting Tips Consumer

Power Outage

If a flashing time is in the display, you have

To reset the clock, touch the CLOCK pad.

experienced a power failure. Reset the clock.

Enter the correct time of day by touching

 

the + or – pads. Touch the START/ON pad.

 

7

Support

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Write the model and serial numbers here Model # Serial # Safety Instructions Operating InstructionsAll ranges can tip and injury could result Consumer Support TroubleshootingSupport Operating Instructions Care and Cleaning TroubleshootingTips Consumer Consumer Troubleshooting Tips Care and CleaningSafety Using the surface unitsTips Consumer Support Been a power outage. Reset the clock Using the oven controlsConsumer Support Troubleshooting Tips Care and Cleaning Functions must be resetTo lock/unlock the controls Instructions Care and CleaningTroubleshooting Tips Consumer Power Outage Control LockoutInstructions Using the ovenTips Care and Cleaning TroubleshootingBroiling Guide How to Set the Oven for BroilingInstructions Operating Broiling GuideCleaning Using the clock and timerTroubleshooting Tips Care How to Set a Delayed Start and Automatic Stop Safety InstructionsTroubleshooting Tips Consumer Support How to Set an Immediate Start and Automatic StopSafety Instructions Special features of your oven controlHour Shut-Off Designed for use on the Jewish Sabbath and Holidays Using the Sabbath FeatureSafety Instructions How to Set for Regular Baking/RoastingConsumer Support To Adjust the ThermostatHow to Exit the Sabbath Feature Type of margarine will affect baking performanceHow to Set the Oven for Cleaning Using the self-cleaning ovenCleaning Troubleshooting Tips Consumer Support Before a Clean CycleVinegar and water mixture Consumer Support Troubleshooting TipsAfter a Clean Cycle How to Delay the Start of CleaningControl Panel Care and cleaning of the rangeHow to Remove Packaging Tape Control KnobsOperating Instructions Consumer Support Troubleshooting Tips Care and CleaningLift-Off Oven Door Cleaning Troubleshooting Tips ConsumerCleaning the Oven Door Instructions Operating Instructions CareTo replace the cover Oven Light ReplacementBroiler Pan and Grid To remove the coverTroubleshooting Tips Operating Instructions Care and CleaningInstructions Problem Possible Causes What To Do Before you call for service…Clean cycle See the Using the self-cleaning oven sectionDuring a clean cycle Unlock Oven not clean afterDisplay Power outageA number Or letter flashWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Care and Cleaning Safety InstructionsOperating Instructions Safety Instructions Looking For Something More? AccessoriesGE Will Provide GE Electric Range WarrantyCleaning Troubleshooting Tips Consumer Support Instructions CareReal Life Design Studio Schedule ServiceParts and Accessories Consumer Support GE Appliances Website
Related manuals
Manual 16 pages 27.5 Kb

JDP39 specifications

The GE JDP39 and JDS28 series, including model 131-10595-2 1-07 JR, represent significant advancements in the realm of electronic instrumentation and components, essential for various industrial applications. These models are part of General Electric's ongoing commitment to innovation and reliability in technology.

One of the standout features of the JDP39 and JDS28 models is their robustness in harsh environments. Designed with durability in mind, these devices can withstand extreme temperatures, humidity, and vibration, making them ideal for use in sectors such as aerospace, manufacturing, and power generation. The materials used in their construction ensure longevity and reliable performance under stress.

In terms of technology, the GE JDP39 model employs advanced signal processing capabilities. This enables high accuracy and rapid response times in measurement applications. The devices incorporate state-of-the-art sensors that provide precise data, which is crucial for monitoring and controlling various industrial processes. This level of precision is particularly beneficial in applications where safety and efficiency are paramount.

The JDS28 series is known for its user-friendly interface and ease of integration with existing systems. Designed with operators in mind, these devices feature intuitive controls and clear displays that ensure quick adaptation and minimal training period for users. Furthermore, they support various communication protocols, facilitating seamless integration into modern automated systems.

Power efficiency is another significant characteristic of the GE JDP39 and JDS28 models. With a focus on reducing energy consumption without compromising performance, these devices utilize advanced power management technologies. This not only lowers operational costs but also aligns with global initiatives aimed at promoting energy sustainability.

Additionally, GE has incorporated advanced diagnostic features into these models. Users can access real-time data and alerts regarding the operational status, enabling proactive maintenance and reducing downtime. This predictive capability is vital for organizations seeking to enhance their operational efficiency and minimize unexpected failures.

In conclusion, the GE JDP39, JDS28, and the 131-10595-2 1-07 JR model embody the intersection of durability, advanced technology, and user-friendly design. Their features make them an indispensable choice for industries requiring reliable instrumentation that can perform consistently under challenging conditions. As industries continue to evolve and embrace automation, these devices stand out as essential tools for achieving operational excellence.
Top Page Image Contents