840107300 ENv02 11/25/02 11:05 AM Page 5
To Insert Beaters
1.Always make sure mixer is unplugged and speed control is set to 0 (OFF).
2.Insert a beater into an opening on the bottom
of the mixer. Push until it clicks into place. Repeat with other beater.
To Insert Dough Hooks
1.Always make sure mixer is unplugged and speed control is set to 0 (OFF).
2.Insert dough hook with collar into the opening indicated by
Collar | the illustration | |
on the mixer. | ||
|
3.Align tabs on the dough hook with the slots in the
Slot | opening. Push | |
Tabs | until it clicks | |
into place. | ||
| ||
| Repeat with | |
| the other | |
| dough hook. |
To Mix
1.Always make sure mixer is unplugged and speed control is set to 0 (OFF). Insert beaters.
2.Plug mixer into electrical outlet. Place beaters into bowl.
3.Move the speed control to desired speed, starting at 1 and increasing to a higher speed as necessary.
4.When finished mixing, move speed control to 0 (OFF) and unplug mixer.
5.To eject beaters, with speed control set at 0 (OFF) push straight down on the speed control.
6.To remove mixer from stand, hold mixer and press mixer release button. Pull mixer to release from stand.
Optional Features (available on selected models)
Mixer Lockdown Tabs
Use this feature to lock the mixer in the “down” position when using on the stand. Squeeze the tabs together to lift the mixer head.
Bowl Control Lever
Use the lever to move the turntable. This allows you to position the beaters near the edge of the bowl or in the center of the bowl.
Power Surge
Press and hold down the button for 
additional power
at any speed.
NOTE: Never use
Power Surge for more than two minutes at a time or motor may overheat.
5