GE JVM230BL COOmG by TME, Using the Time Cook II Feature, Fill a CUP 2/3 full of water, add

Page 12

COOmG BY TME

Time Cook I

Time Cook allows you to microwave for a preset amount of time.

Power Level 10 (High) is recommended for most cooking, but you may change this for more flexibility. See the Cooking Guide.

To become better acquainted with time cooking, make a cup of coffee by following the steps below.

Step 1: Fill a CUP 2/3 full of water, add

1 teaspoon of instant coffee and stir to dissolve. Use a cup that has no metal decoration

and is microwave-safe (refer to the Microwaving Tips section). Place cup in oven and close door.

Step 2: Touch TIME COOK I &II pad.

m

n Step 3: Select your time. Touch pads 1,0 and O for 1 minute.

1

Because automatic Power Level 10 is recommended for this cup of coffee, there is no need to change the power level. (If Power Level 10 is not appropriate, see “How to Change Power Level” below.)

Step 4: Touch the START pad.

START

D

Step 5: When time is up, the oven signals and flashes “End.” The oven, light and fan shut off.

Step 6: Open the door.

If you interrupt Time Cook to check the food, simply close the door and press START to resume cooking. If there is not time remaining on the timer you must reset the timer to resume cooking.

How to Change Power Level

1.Press TIME COOK I & II.

2.Select cooking time.

3.Press POWER LEVEL.

4.Select power.

5.Press START.

Using the Time Cook II Feature

The Time Cook II feature lets you set 2 time cooking functions within 1 program. This is ideal if you want to change power levels during your cooking operations. Here’s how to do it.

Step 1: Place food in oven in microwave-safe container and close the door.

Step 2: Touch TIME COOK

m1’11

step 3: Select your first cook time. For example, touch 2, 1 and 5 for 2 minutes and 15 seconds.

Step 4: Touch TIME COOK I & II.

Step 5: Set your second cook time.

Step 6: Change the power level.

How to Change Power Level

1.Press TIME COOK I & II.

2.Select cooking time.

3.Press POWER LEVEL.

4.Select power.

5.Press START.

Step 7: At the end of “COOK ~ME I,” the second power level is displayed and “COOK TIME II” is shown counting down.

Step 8: When time is up, the oven signals and flashes “End.” The oven, light and fan shut off.

Step 9: Open the door.

If you interrupt Time Cook to check the food, simply close the door and press START to resume cooking. If there is not time remaining on the timer you must reset the timer to resume cooking.

Image 12
Contents SpacemakeP Microwave Oven ~LP US ~LP YOU PRECA~ONS to Avod POSS~LE Exposure To EXCESS~ Mcrowaw E~RGYDo not cover or block any openings on the appfiance Do not use your microwave oven to dry newspapersFor best operation, plug this appliance into hs Page Optional Accessories Me Efiaust Hood~~Boiable c~king pouches and ti@dy ~~@ JX81A Charcoal Filter ~t for non-vented instigationIf YOU Need Service AUTO~TIC FAN FEA WarmWhen You Plug in the Oven Your Touch Control PA~L= FtiDTEMP Cook no Souno WGW MS. DEF Time III Code For all cooking features FEATU~S of Your OWNCooHng Complete Retinder Ktchen Timer Using a Holding TimeHow to Time a 3-Minute Phone Call Programming Delayed CookingUsing the Time Cook II Feature How to Change Power LevelCOOmG by TME Time CookExpress Cook Feature How to Use Auto StirtPoPcom Time Defrost Power Level DEFROST~G by T~Questions and Answers Defrosting TipsCan I defrost small items in a hurry? How to Set Auto Defrost Auto DefrostAuto Defrost Stind TimeRecommended MIN.-MAX Stand Time Foods Weight Instructions Glossary of MICROWA~ Terms Basic Wcrowave Guidelines=AT~G or RE~AT~G G~E DEFROST~G G~E Food Time CommentsVegetables Vegetible Amount TimeHow to Clean the Inside How to Clean the OutiideCAm Am CLEA~G Cooktop Light Oven LightTo Clean and Replace Grease Filter ~ EX~UST ~ATUmRewable Grease Filters on all models Charcoal Filter on some modelsTo Install Charcoal Filter GRO-~G ~STRUCTIONSTo Remove Charcoal Filter QUESTIONS? USE this Problem Solver Au these things are normal with your microwave ovenWdll Be There JVM230\’ JVM231 ~