Basic setup
POWER
Starting setup
The STARTING SETUP function makes installing your unit easily. It leads you the Language selection, TV/CABLE selection and auto channel memory
automatically. | / |
| |
IMPORTANT: Make sure that the antenna or cable TV system connection | ENTER |
is made! |
|
Starting setup
1 Press POWER.
The starting setup function begins and the Language setup menu appears on the screen. Press 
or 
to select your desired language, then press ENTER.
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
4 Now the “AUTO CH MEMORY” and “AUTO CLOCK”starts.
After the starting setup is completed, the TV channel appears on the screen.
AUTO CH MEMORY
STOP : CANCEL
2 Press 
or 
to select “TV” or “CABLE”, then press ENTER.
CHANNEL PLAN
TV
CABLE
Press 
or 
to select “START”, then press
3 ENTER.
If you select “CANCEL” and press ENTER, the STARTING SETUP stops and changes to the TV screen.
AUTO SETUP
START
CANCEL
Notes:
•The starting setup function will work only when you press POWER for the first time.
•In “AUTO CLOCK” setting, it may take more than 10 minutes to read the EDS signal for one channel, which has only “Time of day” or “Local time zone”.
18
5W50101A | 18 | 2/22/06, 6:41 PM |