Playback (VCR)
Loading and unloading a cassette tape
Use only video cassette tapes marked .
Loading
Push the center of the tape until it is automatically inserted.
Automatic power ON
Insert the cassette tape with its labeled side facing up and the erase prevention tab positioned at your left. An inverted cassette tape cannot be inserted.
Erase prevention tab
When you insert a cassette tape, the unit power will turn ON automatically.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
Unloading
1 Press STOP/EJECT on the front panel or remote control.
or
2 Remove the cassette tape.
Playback (VCR)
Automatic tape eject
This unit will automatically rewind the tape when the tape has ended. And when the tape is rewinded to its beginning, the cassette tape will be ejected automatically.
Notes:
•Always eject the tape when not in use.
•The cassette tape can be ejected even if the POWER is “OFF”.
To prevent accidental erasure
To prevent accidental erasure
Remove the erase prevention tab with a screwdriver.
Screwdriver
Erase prevention tab
To record again
Cover the hole with a piece of adhesive tape.
Adhesive tape
Tape speed and maximum recording time
Tape Speed |
|
| Video cassette tape |
|
| ||
|
| ||||||
|
|
| |||||
SP (Standard Play) | 2 hours |
|
| 1 hour | 30 minutes | ||
SLP (Super Long Play) | 8 hours | 6 hours |
|
| 3 hours | ||
|
|
|
|
|
|
|
|
33
5W50101A | 33 | 2/22/06, 6:42 PM |